HCPL2601W

Logic Output Optoisolators Overview

The HCPL2601W is a high-speed logic output optoisolator manufactured by onsemi. It features a single channel with an open collector output configuration, supporting data rates up to 10 Mbps. The device provides electrical isolation of 2500 Vrms and exhibits a common-mode transient immunity (CMTI) of 5 kV/µs. Key timing parameters include maximum propagation delays of 75 ns for both low-to-high and high-to-low transitions, with typical rise and fall times of 50 ns and 12 ns respectively. It operates within a supply voltage range of 4.5 V to 5.5 V and is housed in an 8-MDIP package.

Logic Output Optoisolators Feature Summary

• High-speed data transmission capability up to 10 Mbps
• Robust common-mode transient immunity of 5 kV/µs
• Open collector output interface for flexible logic integration

Logic Output Optoisolators Applications

• Digital signal isolation in industrial communication systems
• Gate drive circuits for power electronics
• Microcontroller input/output isolation

Logic Output Optoisolators Procurement Notes

Verify the specific suffix 'W' corresponds to the 8-MDIP package variant when sourcing. Confirm RoHS compliance status through official manufacturer documentation or datasheets prior to procurement. Ensure the component meets the required operating temperature range of -40°C to 85°C for the intended application environment.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital isolation is required with moderate voltage ratings. The open collector output necessitates an external pull-up resistor for proper logic level generation. Consider the 2500 Vrms isolation barrier suitability for the specific circuit safety requirements compared to higher voltage alternatives.

Logic Output Optoisolators Part Context

This part belongs to the HCPL2601 series of logic output optoisolators from onsemi. It is designed to provide reliable signal transmission across isolated boundaries while maintaining signal integrity at high speeds. The series is commonly used in applications requiring galvanic isolation between different voltage domains.

Logic Output Optoisolators Replacement Considerations

Public confirmed substitute part numbers are not available in the provided source material.