HCPL2611VM

Logic Output Optoisolators Overview

The HCPL2611VM is a single-channel high-speed logic gate optocoupler manufactured by onsemi. It features an open collector output and supports data rates up to 10 Mbps. The device provides electrical isolation with a rated voltage of 2500 Vrms and a common-mode transient immunity (CMTI) of 10 kV/µs. Typical propagation delays are 75 ns for both rise and fall transitions, with typical rise and fall times of 50 ns and 12 ns, respectively. It operates within a temperature range of -40°C to +85°C and accepts a maximum DC forward current of 50 mA.

Logic Output Optoisolators Feature Summary

• High-speed logic gate output architecture designed for rapid signal transmission
• Robust common-mode transient immunity capability for noise-sensitive environments
• Open collector output configuration providing flexible interfacing options

Logic Output Optoisolators Applications

• Industrial communication bus interfaces requiring galvanic isolation
• Data acquisition systems needing high-speed signal transfer
• Power supply control circuits with isolated feedback loops

Logic Output Optoisolators Procurement Notes

Verify the specific manufacturer designation, as this component has been produced by multiple vendors including Broadcom and onsemi. Confirm that the 2500 Vrms isolation rating aligns with your system requirements, as other variants in the series may offer different insulation levels. Ensure the open collector output type matches your downstream logic interface needs before finalizing procurement.

Logic Output Optoisolators Selection Notes

Select this component when a high-speed response is critical alongside moderate isolation voltage requirements. The 10 Mbps data rate suits applications where faster than standard optocouplers is needed but extreme GHz speeds are unnecessary. Consider the open collector output if pull-up resistor flexibility is required for voltage level shifting between different logic families.

Logic Output Optoisolators Part Context

This part belongs to the HCPL-26xx series of high-speed optocouplers. These devices are widely used in industrial automation and telecommunications. The HCPL2611VM specifically denotes the onsemi manufacturing source for this single-channel variant, distinguishing it from similar parts produced by other semiconductor manufacturers under the same functional specification.

Logic Output Optoisolators Replacement Considerations

HCPL2611S is a documented substitute part number for this component.