HF30ACC322513-TD25

Chip Ferrite Bead Overview

The HF30ACC322513-TD25 is a single-line ferrite chip bead from the HF-ACC series, manufactured by TDK Corporation. Designed for surface mount applications in the 1210 (3225 metric) package, it measures 3.20 mm in length, 2.50 mm in width, and 1.50 mm in height. The component provides an impedance of 31 Ohms at 100 MHz with a maximum DC resistance of 50 mOhms. It supports a rated current of 1.5 A and operates within a temperature range of -40°C to +125°C. This part is AEC-Q200 qualified for automotive reliability.

Chip Ferrite Bead Feature Summary

• AEC-Q200 qualified for automotive electronic applications
• High current handling capability of 1.5 Amperes
• Low DC resistance to minimize signal loss
• Compact 1210 surface mount footprint

Chip Ferrite Bead Applications

• Automotive signal line filtering
• High-speed data line EMI suppression
• Power supply noise attenuation in compact modules

Chip Ferrite Bead Procurement Notes

Verify component status as this specific part number may be subject to discontinuation notices. Confirm availability through authorized distributors or check for manufacturer-recommended replacements if production units are required. Ensure compliance with RoHS3 specifications and verify packaging options such as tape and reel quantities before ordering.

Chip Ferrite Bead Selection Notes

Select this component when a 1210 footprint ferrite bead with 1.5 A current rating is required. The 31 Ohm impedance at 100 MHz suits high-frequency noise suppression. Compare against the HF-ACB series if lower current ratings are acceptable, or consider the MPZ series for alternative form factors. Ensure the operating temperature range meets system requirements.

Chip Ferrite Bead Part Context

This component belongs to the HF-ACC series, which is specifically designed for automotive applications. It shares the same physical dimensions as the HF-ACB series but offers higher current capacity. The series is part of TDK's portfolio of passive magnetic components used for electromagnetic interference filtering in consumer and industrial electronics.

Chip Ferrite Bead Replacement Considerations

TDK recommends the MMZ1608D500CTDH5 as a substitute, though it differs in package size. Verify electrical compatibility and mechanical fit before substitution.