HI3306JIB/10

Analog To Digital Converters (ADC) Overview

The HI3306JIB/10 is a 6-bit, 10 MSPS flash analog-to-digital converter manufactured by Intersil (formerly Harris Corporation). It utilizes CMOS technology to achieve low power consumption, typically 55mW. The device operates on a single power supply voltage ranging from 3V to 7.5V and features parallel conversion with latched three-state outputs including an overflow bit. Linearity specifications for both Integral Non-Linearity (INL) and Differential Non-Linearity (DNL) are ±0.5 LSB. The component supports a sampling rate of 10MHz with a conversion time of 100ns.

Analog To Digital Converters (ADC) Feature Summary

• CMOS architecture delivering typical power dissipation of 55mW
• Single supply voltage operation between 3V and 7.5V
• Parallel flash conversion technique with 10MHz sampling rate
• High linearity performance with INL and DNL of ±0.5 LSB

Analog To Digital Converters (ADC) Applications

• Digital communication systems
• High speed data acquisition
• Radar signal processing

Analog To Digital Converters (ADC) Procurement Notes

Verify the manufacturer designation as Intersil or Renesas, as Harris Corporation was acquired. Confirm the specific suffix JIB indicates the industrial temperature range (-40°C to 85°C) and the /10 denotes the 10MHz speed grade. Ensure the package type matches the required footprint, typically 20-lead PLCC for this variant.

Analog To Digital Converters (ADC) Selection Notes

Select the HI3306JIB/10 when a 6-bit resolution and 10MHz sampling rate are required within an industrial temperature environment. Compare against the HI3306JIP/10 if a PDIP package is preferred over PLCC. Ensure the system design accommodates the 3V to 7.5V single supply requirement and handles the three-state digital outputs appropriately.

Analog To Digital Converters (ADC) Part Context

This component belongs to the HI3306 family of high-speed A/D converters. The 'J' suffix indicates the industrial temperature range, while 'B' specifies the 20-lead PLCC package. The '/10' suffix differentiates it from the faster '/15' variants by limiting the maximum sampling rate to 10MHz.

Analog To Digital Converters (ADC) Replacement Considerations

Direct pin-compatible replacements within the same family include HI3306JIB/15 for higher speed requirements. Cross-family replacements require verification of interface compatibility and power specifications.