HIN213EIAZ

Overview

The HIN213EIAZ is a full-duplex RS-232 transceiver from the HIN202E/HIN213E family, designed for +5V single-supply operation. It integrates five receivers and three drivers with onboard charge pumps generating ±10V from a 5V input using only 0.1µF external capacitors. The device supports data rates up to 230kbps, meeting EIA high-speed RS-232E and V.28 specifications. It features ±15kV ESD protection on I/O pins per IEC61000, low power shutdown mode (1µA typical), and two active receivers in shutdown for wakeup capability. Operating temperature range is -40°C to +85°C in an SSOP package.

Feature Summary

• High-speed ISDN compatibility with 230kbps data rate
• Robust ±15kV ESD protection on RS-232 I/O pins
• Low power shutdown mode with two active receivers for system wakeup
• Single +5V supply operation with onboard voltage conversion

Applications

• ISDN terminal adapters
• High-speed modem interfaces
• Battery-powered equipment requiring low standby current
• Industrial control systems with noisy environments

Procurement Notes

Verify the suffix 'IAZ' corresponds to the SSOP package and lead-free RoHS compliance as documented. Confirm the manufacturer is Renesas Electronics Corporation or its predecessor Intersil. Ensure the order quantity meets distributor minimums if applicable. Check moisture sensitivity level (MSL 3) requirements for storage and handling before assembly.

Selection Notes

Select this component when five receiver channels are required alongside three drivers in a single +5V RS-232 interface. It is suitable for applications needing high ESD immunity and low power consumption during idle states. Compare against HIN211E or HIN206E if fewer receivers or different shutdown behaviors are needed. Ensure the 230kbps speed meets the system's baud rate requirements.

Part Context

The HIN213EIAZ belongs to the HIN2xxxE series of RS-232 transceivers developed by Intersil, now part of Renesas Electronics. This family addresses the need for high-speed serial communication without requiring dual ±12V supplies. The HIN213E variant specifically provides a higher receiver count compared to other members like the HIN202E or HIN232E, offering flexibility in multi-drop or complex interface designs.

Replacement Considerations

HIN213EIAZ-T is the tape-and-reel version of the same component. HIN213EIB is a PDIP package alternative within the same electrical specification family. Cross-reference with ADM213E from Analog Devices for pin-compatible alternatives with similar electrical characteristics.