HMC525LC4TR-R5

RF Mixers Overview

The HMC525LC4TR-R5 is a GaAs MMIC I/Q mixer manufactured by Analog Devices Inc. It operates in the RF and LO frequency range of 4 GHz to 8.5 GHz, with an intermediate frequency (IF) range from 0 Hz to 3.5 GHz. The device features a maximum conversion loss of 11 dB and a noise figure of 8 dB. Key linearity metrics include an OIP3 of 20 dBm and a P1dB compression point of 13 dBm. Power dissipation is rated at 560 mW. It is housed in an LGA-24 package and supports an operating temperature range from -40°C to +85°C.

RF Mixers Feature Summary

• Integrated In-Phase/Quadrature (I/Q) mixing capability for image-reject applications
• Broadband operation across the 4 GHz to 8.5 GHz spectrum
• Direct current coupling support via 0 Hz IF range

RF Mixers Applications

• Image-reject receiver architectures
• Wideband communication systems
• Test and measurement equipment

RF Mixers Procurement Notes

Verify component authenticity through authorized Analog Devices channels or certified distributors. Confirm RoHS compliance status and lot traceability prior to acquisition. Ensure storage conditions adhere to moisture sensitivity level requirements specified in the datasheet to prevent package degradation during assembly.

RF Mixers Selection Notes

Select this component when image rejection is required within the 4–8.5 GHz band. Compare linearity specifications against system dynamic range requirements. Evaluate thermal management needs based on the 560 mW power dissipation rating. Consider the LGA-24 footprint compatibility with PCB layout constraints.

RF Mixers Part Context

This part belongs to the HMC525A series of RF mixers. It utilizes Gallium Arsenide (GaAs) technology for high-frequency performance. The LC4 suffix indicates specific packaging and tape-and-reel configuration. It serves as a monolithic microwave integrated circuit solution for compact RF front-end designs.

RF Mixers Replacement Considerations

HMC525ALC4TR-R5: Similar series member with potentially different packaging or minor parameter variations. Verify pinout and electrical specifications before substitution.