HRB1206S251J1.50FT

Chip Ferrite Bead Overview

The HRB1206S251J1.50FT is a surface-mount ferrite bead chip from AEM, Inc., housed in a 1206 (3216 Metric) package. It provides an impedance of 250 Ohms at a test frequency of 100 MHz with a tolerance of ±5%. The component supports a maximum DC current rating of 1.5A and has a maximum DC resistance of 100 mOhm. It operates within a temperature range of -55°C to +125°C.

Chip Ferrite Bead Feature Summary

• Provides high-impedance attenuation for high-frequency noise suppression in electronic circuits.
• Designed for surface-mount technology integration onto printed circuit boards.
• Constructed from ferrite material to effectively dissipate electromagnetic interference energy.

Chip Ferrite Bead Applications

• High-reliability signal line filtering
• Power supply noise suppression
• Electromagnetic interference (EMI) mitigation

Chip Ferrite Bead Procurement Notes

Verify the specific suffix 'J' confirms the ±5% impedance tolerance and '1.50FT' indicates the reel quantity or tape configuration as defined by the manufacturer's ordering guide. Confirm the package dimensions match the 1206 standard before finalizing procurement to ensure compatibility with existing footprints.

Chip Ferrite Bead Selection Notes

Select this component when a 250 Ohm impedance at 100 MHz is required for noise control. Ensure the application current does not exceed the 1.5A rating to prevent thermal issues. Verify that the 1206 footprint aligns with the board design constraints and that the operating temperature range meets environmental requirements.

Chip Ferrite Bead Part Context

This part belongs to the HRB series of high-reliability ferrite beads manufactured by AEM, Inc. These components are engineered for robust performance in demanding environments, offering consistent electrical characteristics across the specified temperature range while maintaining a compact form factor suitable for dense PCB layouts.

Chip Ferrite Bead Replacement Considerations

Direct substitutes must match the 1206 package, 250 Ohm impedance at 100 MHz, ±5% tolerance, and 1.5A current rating. Verify DCR limits and temperature specifications against the original datasheet to ensure functional equivalence without altering circuit behavior.

Chip Ferrite Bead FAQ

What is the test frequency for the specified impedance?

The impedance value of 250 Ohms is measured at a test frequency of 100 MHz.

What is the maximum DC current the component can handle?

The maximum DC current rating for the HRB1206S251J1.50FT is 1.5 Amperes.