HVA0560

Overview

The HVA0560 is a miniature, encapsulated high voltage amplifier module from the HVA Series by HVM Technology. It produces a bipolar, zero-crossing output ranging from -6000V to +6000V in response to a 0-5V programming input. The device operates on a 5VDC supply and features an active-low enable pin. Electrical characteristics include less than 0.5% load regulation, under 1% output ripple at full load, and a steady-state no-load input current of less than 100mA. The maximum output current is 100µA with a max load of 350mA.

Feature Summary

• Produces a bipolar, zero-crossing high voltage output proportional to a low-voltage programming signal.
• Integrates a dual polarity high voltage generator and a high-speed amplifier within a single encapsulated package.
• Features an active-low logic-controlled enable input to disable the internal high voltage generator.
• Utilizes proprietary ultra-compact resonant converter design to minimize quiescent current and operating noise.

Applications

• Mass spectrometry
• Electrostatic chucks
• Pockel cells
• Electron microscopes

Procurement Notes

Verify the specific model suffix against the manufacturer's selection guide to confirm the exact output voltage rating (±1kV, ±3kV, or ±6kV) and input voltage requirement (5V or 12V). Ensure the application environment remains within the specified operating temperature range of -40°C to +60°C. Confirm that the load capacitance does not exceed limits that would violate the specified rise/fall time requirements.

Selection Notes

Select the HVA0560 when a ±6000V output is required with a 5VDC system supply. Compare against the HVA1260 if a 12VDC input is preferred for the same voltage range. Consider the HVA0530 or HVA0510 if lower voltage outputs suffice. Evaluate the 30pF versus 10nF load conditions to determine if the <5ms or <500ms rise/fall times meet system timing constraints.

Part Context

The HVA0560 belongs to the HVA Series of miniature bi-polar zero-crossing high voltage amplifiers. This series offers models with ±1kV, ±3kV, and ±6kV outputs available in both 5V and 12V input configurations. All modules share a common space-saving encapsulated package design measuring 3.0 inches in length, 1.5 inches in width, and 0.5 inches in height.

Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.