HZ1206C202R-00

Chip Ferrite Bead Overview

HZ1206C202R-00 is a single-line ferrite bead chip manufactured by Laird-Signal Integrity Products. It features a 1206 (3216 Metric) surface mount package with dimensions of 3.20mm x 1.60mm and a maximum height of 0.043 inches. The component provides an impedance of 950 Ohms at 100 MHz, with a maximum DC resistance of 500 milliohms and a current rating of 300mA. It operates within a temperature range of -40°C to 125°C.

Chip Ferrite Bead Feature Summary

• Provides electromagnetic interference filtering for power and signal lines
• Designed for surface mount assembly in compact electronic circuits
• Constructed as a monolithic single-line component

Chip Ferrite Bead Applications

• Power supply line noise suppression
• Signal line EMI filtering
• High-frequency circuit protection

Chip Ferrite Bead Procurement Notes

Verify the specific suffix designation when ordering, as variants such as HZ1206C202R-10 exist with different impedance characteristics. Confirm RoHS compliance status, as some related series may not meet current environmental standards. Ensure the selected part matches the required 950 Ohm impedance specification for the intended application frequency.

Chip Ferrite Bead Selection Notes

Select this component for applications requiring moderate current handling up to 300mA with low DC resistance. The 1206 footprint allows for standard SMD placement. Consider the operating temperature range of -40°C to 125°C for environmental suitability. Verify that the 950 Ohm impedance at 100 MHz aligns with the target noise frequencies.

Chip Ferrite Bead Part Context

This ferrite bead belongs to the HZ series from Laird-Signal Integrity Products, designed for general-purpose EMI suppression. It is distinct from the discontinued HZ1206D102R-00 and the higher impedance HZ1206C202R-10 variant. The component serves as a passive filter element in modern electronics requiring compact noise control solutions.

Chip Ferrite Bead Replacement Considerations

The HZ1206C202R-10 is a direct substitute but offers 2 kOhm impedance instead of 950 Ohms. Verify if the higher impedance meets the circuit requirements before substitution.