ICL700D15MIC

Inrush Current Limiters (ICL) Overview

The ICL700D15MIC is a Negative Temperature Coefficient (NTC) thermistor from the Eaton ICL family, designed for inrush current limiting. It features a nominal resistance of 7 Ohms at standard reference conditions and a B-parameter of 2850 K between 25°C and 85°C. The component has a maximum steady-state current rating of 5 A and utilizes lead wires with a length of 15 mm. It is supplied in bulk packaging and complies with RoHS standards.

Inrush Current Limiters (ICL) Feature Summary

• Provides effective inrush current limitation during power-up sequences
• Features negative temperature coefficient characteristics for self-regulating thermal response
• Utilizes lead wire configuration for direct circuit integration

Inrush Current Limiters (ICL) Applications

• Power supply input stages
• Transformer primary side protection
• Motor drive circuits

Inrush Current Limiters (ICL) Procurement Notes

Verify the specific B-parameter value against the manufacturer datasheet, as variations exist within the ICL series. Confirm that the 5 A current rating aligns with the application's peak load requirements. Ensure the 15 mm lead length meets mechanical constraints. Check RoHS compliance documentation for regulatory adherence.

Inrush Current Limiters (ICL) Selection Notes

Select this component based on the required 7 Ohm initial resistance to limit startup current effectively. Consider the 2850 K B-parameter for accurate temperature-resistance calculations. Evaluate the 5 A steady-state current capacity against operational loads. Verify package type and lead dimensions for physical fitment.

Inrush Current Limiters (ICL) Part Context

This part belongs to the Eaton ICL series of NTC thermistors. These components are specialized for managing high initial currents in electronic systems. The series offers various resistance and lead length combinations to suit different power levels and mechanical designs.

Inrush Current Limiters (ICL) Replacement Considerations

Cross-reference with other ICL series parts like ICL400D15MIC or ICL800D15MIC if resistance values differ. Ensure substitute parts match the 5 A current rating and 15 mm lead length specifications.