ICL7622BCPD+

$6.68

Description：IC OPAMP GP 2 CIRCUIT 14DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Bulk

SKU:e8bad53fb1c7 Category: Instrumentation, Op Amps, Buffer Amps Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：IC OPAMP GP 2 CIRCUIT 14DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Bulk
Amplifier Type：CMOS
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：1.6V/µs
Gain Bandwidth Product：1.4 MHz
Current - Input Bias：1 pA
Voltage - Input Offset：5 mV
Current - Supply：1mA (x2 Channels)
Current - Output / Channel：-
Voltage - Supply Span (Min)：2 V
Voltage - Supply Span (Max)：16 V
Operating Temperature：0°C ~ 70°C
Grade：-
Qualification：-
Mounting Type：Through Hole
Package / Case：14-DIP (0.300", 7.62mm)
Supplier Device Package：14-PDIP
-3db Bandwidth：-

Download product information

ICL7622BCPD+

Overview

The ICL7622BCPD+ is a single operational amplifier manufactured by Analog Devices Inc./Maxim Integrated. It utilizes CMOS technology and is housed in an 8-pin PDIP package. The device operates within a supply voltage range of 4.5 V to 20 V, with a typical operating current of 250 µA. Key electrical characteristics include a maximum input offset voltage of 3 mV and a bandwidth of 44 kHz. The component supports a dual power supply configuration ranging from ±2.25 V to ±10 V and functions reliably across a commercial temperature range of 0°C to +70°C.

Feature Summary

CMOS architecture designed for low power consumption applications
Single-channel operational amplifier configuration
Wide single or dual supply voltage operation capability

Applications

Battery-powered instrumentation circuits
Low-power signal conditioning systems
General-purpose analog processing tasks

Procurement Notes

Verify the specific suffix 'CPD+' against official manufacturer documentation to confirm the PDIP-8 package type and commercial temperature grade. Confirm availability status as distribution channels may indicate limited stock or discontinuation. Ensure compatibility with existing PCB footprints and soldering profiles before integration into production designs.

Selection Notes

Select this component when a single op-amp with low quiescent current is required. The CMOS process offers high input impedance suitable for passive sensor interfaces. Verify that the 44 kHz bandwidth meets the signal frequency requirements. Consider the PDIP-8 package constraints if surface-mount alternatives are preferred for automated assembly.

Part Context

This part belongs to the Maxim Integrated ICL76xx series of operational amplifiers. These devices are characterized by their CMOS construction, which enables operation from wide supply voltages while maintaining low power dissipation. The series is commonly utilized in portable and battery-operated electronic equipment where efficiency and moderate performance are balanced priorities.