IDT5V2310PGI

Clock Buffers, Drivers Overview

The IDT5V2310PGI is a high-performance 1:10 clock buffer designed for general-purpose applications. It operates within a supply voltage range of 2.3V to 3.6V, supporting frequencies up to 200MHz at VDD = 3.3V and 170MHz at lower voltages. The device distributes one clock input to two banks of five outputs each, featuring pin-to-pin skew of less than 100ps. It includes built-in output enable glitch suppression and 25Ω on-chip series dampening resistors. The component is characterized for industrial operation from -40°C to +85°C and is available in TSSOP packages.

Clock Buffers, Drivers Feature Summary

• High-performance 1:10 clock driver with pin-to-pin skew < 100ps
• Operates up to 200MHz at VDD = 3.3V; frequency limit is 170MHz at VDD = 2.3V-2.7V
• Output enable glitch suppression ensures synchronized output enable sequence
• Includes 25Ω on-chip series dampening resistors

Clock Buffers, Drivers Applications

• General-purpose clock distribution systems requiring low skew
• Systems utilizing 2.5V or 3.3V power environments
• Applications requiring synchronized output enable sequences

Clock Buffers, Drivers Procurement Notes

Verify the specific package variant, as the PG suffix denotes a Thin Shrink Small Outline Package (TSSOP). Confirm that the required operating temperature range aligns with the industrial specification (-40°C to +85°C). Check current availability status, as older components may have end-of-life implications or limited stock depending on the distributor.

Clock Buffers, Drivers Selection Notes

Select this component when a single clock source needs to drive ten loads with minimal skew. Ensure the system voltage falls within the 2.3V to 3.6V range. Consider the 20-pin TSSOP footprint if board space allows. Verify that the load capacitance requirements are met by the output drive capabilities specified in the datasheet.

Clock Buffers, Drivers Part Context

The IDT5V2310 belongs to the IDT family of high-performance clock buffers. It is manufactured by Integrated Device Technology, Inc., which was later acquired by Renesas Electronics Corporation. The 'PG' suffix specifically identifies the 20-pin Thin Shrink Small Outline Package (TSSOP) variant with green (RoHS compliant) materials.

Clock Buffers, Drivers Replacement Considerations

Direct pin-to-pin replacements should be sought among other 1:10 clock buffers with similar skew specifications and voltage ranges. Verify that any substitute supports the required 200MHz frequency and has compatible output drive characteristics.