IKCM10H60GAXKMA1

Overview

The IKCM10H60GAXKMA1 is a CIPOS™ Mini intelligent power module featuring TRENCHSTOP™ IGBTs and an integrated SOI gate driver. It provides a three-phase inverter configuration with a 600V blocking voltage and 10A rated current. The device includes built-in bootstrap diodes, under-voltage lockout, over-current shutdown via the ITRIP pin, and temperature monitoring through an NTC thermistor accessible at the VFO pin. Low-side emitters are exposed for phase current sensing.

Feature Summary

• Integrated SOI gate driver technology providing stability against transient and negative voltage spikes.
• Built-in cross-conduction prevention with minimum deadtime insertion to protect switches.
• Open-emitter design allowing direct access to low-side emitters for individual phase current monitoring.
• Comprehensive protection suite including under-voltage lockout, over-current shutdown, and thermal monitoring.

Applications

• Variable speed drives for three-phase AC motors
• Permanent magnet motor control systems
• Washing machine compressor drives
• Fan motor controllers

Procurement Notes

Verify the specific suffix 'XKMA1' against the manufacturer's latest datasheet revision to confirm terminal plating and packaging details. Ensure the application environment remains within the specified industrial operating case temperature range of -40°C to +125°C. Confirm that the DC link supply voltage does not exceed the absolute maximum rating of 450V to prevent device failure.

Selection Notes

Select this component for applications requiring high switching frequencies around 15kHz due to its low turn-off switching loss. The module is suitable for designs needing good thermal conduction combined with electrical isolation. Consider the open-emitter topology if precise current sensing for each phase leg is required without external sensors.

Part Context

This part belongs to the CIPOS™ Mini family from Infineon Technologies. It integrates power semiconductors and control logic into a single Dual In-Line molded package. The series is designed to optimize PCB size and system costs while increasing reliability in power conversion applications.

Replacement Considerations

IKCM10H60GA

FAQ

How is the internal temperature monitored?

The module contains an integrated NTC thermistor. Its resistance value is accessible via the VFO pin, which can be connected to a microcontroller using an external pull-up resistor.

What is the function of the ITRIP pin?

The ITRIP pin enables over-current detection by connecting to the IGBT collector current feedback. If the threshold is exceeded, it triggers a shutdown of all gate driver outputs after a propagation delay.

Can the module handle negative voltage transients on the high side?

Yes, the VS pins provide robustness against negative voltage transients relative to VSS up to -50V, ensuring stable operation under rough conditions.