— IC芯片 | 连接器 | 传感器 | 被动器件 —
Product Detailed Parameters
- Description:IC TRANSCEIVER FULL 1/1 14SOIC
- Mfr:Renesas Electronics Corporation
- Package:Tape & Reel (TR)
- Series:-
- Type:Transceiver
- Protocol:RS422, RS485
- Number of Drivers/Receivers:1月1日
- Duplex:Full
- Data Rate:250kbps
- Voltage - Supply:4.5V ~ 5.5V
- Operating Temperature:-40°C ~ 85°C
- Mounting Type:Surface Mount
- Package / Case:14-SOIC (0.154", 3.90mm Width)
- Supplier Device Package:14-SOIC
- Receiver Hysteresis:25 mV
- Grade:-
- Qualification:-
Download product information
Overview
The ISL31490EIBZ-T is a fault-protected, full-duplex RS-485/RS-422 transceiver manufactured by Renesas Electronics Corporation. It operates on a single 4.5V to 5.5V supply and supports data rates up to 250kbps with slew-rate limiting enabled. The device features ±60V bus pin fault protection and an extended common mode range of ±25V. It includes hot-plug circuitry, low quiescent current (2.3mA typical), and ultra-low shutdown current (10µA typical). Packaged in a 14-lead SOIC (M14.15) for industrial temperatures ranging from -40°C to +85°C.
Feature Summary
- Bus pins protected against faults up to ±60V
- Extended common mode voltage tolerance of ±25V
- Full fail-safe receiver design for open, shorted, or idle bus conditions
- Hot-plug capability keeping outputs three-state during power transitions
Applications
- Utility meters and automated meter reading systems
- PROFIBUS and field bus networks
- Security camera networks
- Industrial process control networks
Procurement Notes
Verify the specific ordering suffix '-T' indicates tape and reel packaging as per manufacturer tech brief TB347. Confirm that the 'IBZ' designation corresponds to the 14-lead SOIC package variant. Ensure RoHS compliance requirements are met for the intended manufacturing process.
Selection Notes
Select this component when designing full-duplex RS-485 or RS-422 interfaces requiring high noise immunity and robust fault protection. The 250kbps data rate and slew-rate limiting make it suitable for longer cable runs where signal integrity is critical. Verify that the 14-pin SOIC footprint aligns with the PCB layout constraints.
Part Context
This part belongs to the ISL3149xE family of differential transceivers designed to exceed standard RS-485 and RS-422 specifications. The 'ISL31490E' base model specifically denotes a full-duplex configuration with 250kbps speed capability. The 'IBZ' suffix identifies the physical package type, while 'T' specifies the bulk packaging format.
Replacement Considerations
Public confirmed substitute: ISL32490E Series.
ChipApex | Global Electronic Components Supplier








