IXA10-FBFF10-24.000MHZ

Crystals Overview

The IXA10-FBFF10-24.000MHZ is a parallel fundamental quartz crystal manufactured by ILSI America. It operates at a nominal frequency of 24 MHz with a frequency tolerance of ±30 ppm and stability of ±50 ppm. The component features an equivalent series resistance (ESR) of 150 Ohms maximum, a load capacitance of 10 pF, and a drive level of 100 µW. It utilizes a surface-mount 4-SMD, no-lead package with dimensions of 1.6mm x 1.2mm x 0.4mm. The device is compliant with RoHS standards and supports lead-free processing.

Crystals Feature Summary

• Ultra-miniature surface-mount ceramic package design
• Compatible with lead-free soldering processes
• Low-cost construction for high-volume applications

Crystals Applications

• Navigation systems
• GPS modules
• Mechanical control circuits

Crystals Procurement Notes

Verify the specific suffix codes against official ILSI documentation to ensure exact frequency tolerance and packaging specifications match project requirements. Confirm that the 10pF load capacitance aligns with the target circuit design. Ensure compliance with RoHS directives if required by regional regulations. Cross-reference the 150 Ohm ESR limit with oscillator driver strength capabilities to prevent overdriving or failure to start.

Crystals Selection Notes

Select this component when a compact 24 MHz reference is needed for space-constrained designs. The 1.6mm x 1.2mm footprint offers significant size reduction compared to traditional through-hole crystals. Consider the ±30 ppm tolerance sufficient for general clocking needs where higher precision is not critical. The 100 µW drive level minimizes power consumption and stress on the crystal lattice.

Crystals Part Context

This part belongs to the IXA10 series of miniature quartz crystals from ILSI America. The series is characterized by its small physical profile and suitability for modern surface-mount assembly lines. It serves as a fundamental resonator for generating stable clock signals in digital electronics. The product line emphasizes cost-effectiveness and reliability for consumer and industrial electronic applications.

Crystals Replacement Considerations

Direct substitutes must match the 24 MHz frequency, 10pF load capacitance, and 1.6x1.2mm SMD package. Verify equivalent ESR and drive level specifications to maintain circuit stability. Check for compatible aging rates and temperature stability ranges. Ensure the replacement component meets the same RoHS and lead-free processing requirements.