IXGP16N60B2D1

Overview

The IXGP16N60B2D1 is a single IGBT from the IXYS S Series, housed in a TO-247AD package. It features a 600 V collector-emitter breakdown voltage and a continuous collector current of 16 A at 25°C. The device exhibits a maximum saturation voltage of 2.3 V at 16 A with a 15 V gate drive. Key switching parameters include a gate charge of 38 nC, turn-on delay of 95 ns, turn-off delay of 110 ns, rise time of 45 ns, and fall time of 130 ns. It operates within a junction temperature range of -55°C to 150°C.

Feature Summary

• S Series technology providing enhanced short-circuit safe operating area (SCSOA) capability for robust fault protection.
• Low saturation voltage design optimized for high-efficiency power conversion applications.
• Standard input type compatible with common gate driver interfaces.

Applications

• Motor drives and inverters
• Switched-mode power supplies (SMPS)
• Induction heating systems

Procurement Notes

Verify component authenticity through authorized IXYS distributors or direct manufacturer channels. Confirm lot codes and traceability documentation match specific project requirements. Check for RoHS compliance status as indicated on official datasheets. Ensure storage conditions adhere to moisture sensitivity level guidelines prior to soldering.

Selection Notes

Select this component when a balance of moderate current handling and low conduction loss is required in a TO-247 form factor. Compare gate charge values against available gate driver capabilities to ensure adequate switching speed without excessive drive power. Verify thermal management solutions can handle the specified power dissipation under worst-case operating conditions.

Part Context

This part belongs to the IXYS S Series lineup, which focuses on improving short-circuit ruggedness compared to standard IGBTs. The 'G' suffix typically denotes the TO-247AD plastic package variant. It serves as a discrete solution for medium-power industrial electronics where reliability during transient faults is critical.

Replacement Considerations

Direct substitutes may include other IXYS S Series devices with similar voltage and current ratings, such as the IXGH40N60B3D1 for higher current needs. Cross-manufacturer equivalents should be evaluated based on pinout compatibility, Vce(sat) characteristics, and switching energy losses.