JN5164/001,518

RF Transceiver ICS Overview

The JN5164/001,518 is an IEEE 802.15.4 compliant RF microcontroller from NXP Semiconductors operating in the 2.4 GHz to 2.5 GHz band. It integrates a 32-bit RISC core with a maximum clock frequency of 32 MHz and supports I2C, SPI, UART, and JTAG interfaces. The device features 160 kB of Flash program memory, 32 kB of RAM, and 4 kB of EEPROM. It includes a 10-bit ADC with four channels and provides 20 general-purpose I/O pins. The unit operates on a supply voltage ranging from 2 V to 3.6 V and functions within a temperature range of -40°C to +125°C.

RF Transceiver ICS Feature Summary

• Integrates a high-performance 32-bit RISC processor with variable-width instructions and a multi-stage pipeline for efficient code execution.
• Includes an on-chip 128-bit AES security processor and MAC accelerator for packet formatting and address checking.
• Supports low-power operation with programmable clock speeds and various sleep modes suitable for battery-powered applications.

RF Transceiver ICS Applications

• ZigBee Home Automation (ZHA) devices
• ZigBee Light Link (ZLL) implementations
• ZigBee Green Power (ZGP) networks
• IEEE 802.15.4 wireless sensor nodes

RF Transceiver ICS Procurement Notes

Verify the specific ordering suffix matches the required package and tape/reel configuration. Confirm RoHS compliance status and export documentation requirements prior to purchase. Ensure the component is sourced from authorized distributors to guarantee authenticity and traceability. Check for any obsolescence notices or recommended replacement parts such as the K32W series for new designs.

RF Transceiver ICS Selection Notes

Select this component when a balance of moderate memory capacity and cost-effectiveness is required for ZigBee applications. It is suitable for projects needing 160 kB Flash and 32 kB RAM without the higher transmit power of the JN5169. Consider the 40-HVQFN package constraints and surface-mount installation requirements during PCB layout design.

RF Transceiver ICS Part Context

This part belongs to the JN516x family of wireless microcontrollers, which share a common architecture including the enhanced 32-bit RISC core and IEEE 802.15.4 radio transceiver. Within this family, the JN5164 offers less Flash memory than the JN5168 and JN5169 but maintains the same RAM size and peripheral set. It is designed for applications where full ZigBee Smart Energy support is not mandatory.

RF Transceiver ICS Replacement Considerations

NXP recommends the K32W061/41 or JN5189/88T for any new Zigbee, Thread, and Bluetooth LE 5.0 designs. No new software releases are planned for the JN516x series. Verify if the target application requires updated protocol support before selecting a successor.

RF Transceiver ICS FAQ

What is the maximum transmit power of the JN5164?

The JN5164 supports a maximum transmit power of +2.5 dBm.

Does the JN5164 support ZigBee Smart Energy?

No, the JN5164 supports ZB3, ZHA, ZLL, ZGP, and IEEE protocols, but does not include ZigBee Smart Energy (ZSE) support, which is available in the JN5168.

What is the sensitivity of the receiver?

The receiver sensitivity is -96 dBm.