KBPC10/15/2501WP

Overview

The Diotec Semiconductor KBPC10/15/2501WP is a single-phase diode bridge rectifier designed for commercial and industrial applications. It features an average forward current (IFAV) of 10 A at a case temperature of 95°C, with a repetitive peak reverse voltage (VRRM) of 100 V. The device utilizes wire terminals for connection and incorporates four diodes in a bridge configuration within a plastic case equipped with an isolated aluminum baseplate. Key electrical parameters include a maximum forward voltage (VF) below 1.2 V, a peak forward surge current (IFSM) of 270 A at 50 Hz, and a typical reverse recovery time (trr) of approximately 1500 ns. The component supports a maximum junction temperature of 150°C.

Feature Summary

• Four diodes integrated in a bridge configuration
• Plastic case construction with an isolated aluminum baseplate
• UL recognized under File E175067
• Compliant with RoHS directives

Applications

• 50/60 Hz mains rectification
• General power supplies

Procurement Notes

Verify the specific ordering suffix to confirm terminal type and qualification status. The WP suffix indicates wire terminals. Confirm compliance requirements such as REACH and conflict minerals against project specifications. Ensure thermal management design accounts for the specified thermal resistance from junction to case when operating near maximum ratings.

Selection Notes

Select this component for standard commercial or industrial grade applications requiring reliable single-phase rectification. The 100 V rating suits low-voltage AC-to-DC conversion circuits. Verify that the required surge current capability meets the circuit's inrush demands. Consider the wire terminal style for assembly compatibility with the target PCB or chassis mounting strategy.

Part Context

This part belongs to the KBPC10/15/25 series, which offers various current ratings and voltage options. The KBPC10/15/2501WP specifically denotes the 10 A current variant with a 100 V reverse voltage rating. The series provides standardized dimensions and thermal characteristics across different voltage grades, facilitating design flexibility within power supply architectures.

Replacement Considerations

Direct substitutes must match the 10 A current rating, 100 V reverse voltage, and wire terminal configuration. Check thermal resistance values and physical dimensions to ensure mechanical fit. Verify that alternative components meet the same UL recognition and RoHS compliance standards.