LMV922MMX

$0.59

Description：IC OPAMP GP 2 CIRCUIT 8VSSOP
Series：LMV®
Mfr：Texas Instruments
Package：Tape & Reel (TR)

SKU:5e2846422df6 Category: Instrumentation, Op Amps, Buffer Amps Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LMV922MMX is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC OPAMP GP 2 CIRCUIT 8VSSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for LMV922MMX

Description：IC OPAMP GP 2 CIRCUIT 8VSSOP
Series：LMV®
Mfr：Texas Instruments
Package：Tape & Reel (TR)
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：0.45V/µs
Gain Bandwidth Product：1 MHz
Current - Input Bias：12 nA
Voltage - Input Offset：1.5 mV
Current - Supply：400µA
Current - Output / Channel：75 mA
Voltage - Supply Span (Min)：1.5 V
Voltage - Supply Span (Max)：5 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package：8-VSSOP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for LMV922MMX

LMV922MMX

Instrumentation, Op Amps, Buffer Amps Overview

The LMV922MMX is an obsolete dual-channel operational amplifier manufactured by Texas Instruments. It operates from a single supply voltage ranging from 1.8V to 5.0V and features rail-to-rail input and output capabilities. The device provides a gain-bandwidth product of 1MHz with a typical supply current of 330µA at 1.8V. Input offset voltage is typically -1.8mV, and the common-mode rejection ratio reaches 82dB. It supports driving loads as low as 600Ω and capacitive loads up to 1000pF.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Rail-to-rail input and output swing capability for maximum dynamic range utilization
Optimized for low-power operation in portable battery-powered systems
Capable of driving 600Ω resistive loads and up to 1000pF capacitive loads

Instrumentation, Op Amps, Buffer Amps Applications

Cordless and cellular phones
Laptops and PDAs
PCMCIA cards
Portable and battery-powered electronic equipment
Supply current monitoring circuits

Instrumentation, Op Amps, Buffer Amps Procurement Notes

This component is officially designated as obsolete by Texas Instruments. Verify availability through authorized distributors or secondary markets. Confirm that the specific package variant matches design requirements, as legacy stock may vary. Ensure compliance with end-of-life transition plans for production hardware.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this part only if the application specifically requires the LMV922 family characteristics and can accommodate its obsolete status. Consider modern equivalents if long-term supply assurance is critical. Verify that the 1MHz bandwidth and low-voltage operation align with system constraints before finalizing the design.

Instrumentation, Op Amps, Buffer Amps Part Context

The LMV922 belongs to the LMV92x series, which includes single (LMV921) and quad (LMV924) variants. This family was designed for low-voltage, low-power applications requiring rail-to-rail performance. The MMX suffix indicates the VSSOP-8 surface-mount package configuration.