LNA-40-06001800-25-15P

Overview

The LNA-40-06001800-25-15P is a low-noise amplifier module manufactured by L3 Narda-MITEQ. It operates within a frequency range of 6 GHz to 18 GHz, designed for VSAT applications. The device provides a gain of 25 dB with a noise figure of 4 dB. It requires a supply voltage of 15 V and draws a current of 350 mA. The unit features SMA connectors and is packaged in a module form factor.

Feature Summary

• Designed specifically for VSAT communication systems
• Operates across the 6 GHz to 18 GHz frequency band
• Provides high gain with low noise characteristics

Applications

• VSAT uplink and downlink amplification
• Satellite communication receiver front-ends
• Microwave radio relay systems

Procurement Notes

Verify the specific datasheet version from L3 Narda-MITEQ or authorized distributors to confirm electrical tolerances and pinout configurations. Ensure that the 15V power supply requirements are met by the system design. Check for any updated environmental certifications or RoHS compliance status prior to final integration into military or commercial hardware.

Selection Notes

Select this component when a wideband low-noise performance is required between 6 GHz and 18 GHz. The 25 dB gain specification suits applications needing significant signal amplification without excessive noise addition. Consider the SMA connector interface for compatibility with existing RF cabling infrastructure and the module packaging for ease of integration into larger assemblies.

Part Context

This part belongs to the LNA-40 series of low-noise amplifiers from L3 Narda-MITEQ. The series is known for robust construction suitable for demanding environments. Similar models in the lineup include variants with different gain levels and frequency ranges, such as the LNA-40-00100800-40-20P, allowing engineers to tailor specifications to specific bandwidth and sensitivity needs.

Replacement Considerations

Direct substitutes may include other L3 Narda-MITEQ modules within the LNA-40 family that match the 6-18 GHz range and 25 dB gain. Verify mechanical dimensions and connector types before swapping. Cross-referencing with generic RF amplifier modules requires careful validation of noise figure and linearity parameters to ensure system performance is maintained.