LT1036CT

Description：IC REG LIN 12/5V 3A/75MA TO220-5
Series：-
Mfr：Analog Devices Inc.
Package：Tube

SKU:b3c089261db0 Category: Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LT1036CT is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC REG LIN 12/5V 3A/75MA TO220-5. Review the specifications below when checking this part for your BOM.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators specifications for LT1036CT

Description：IC REG LIN 12/5V 3A/75MA TO220-5
Series：-
Mfr：Analog Devices Inc.
Package：Tube
Output Configuration：Positive
Output Type：Fixed
Number of Regulators：2
Voltage - Input (Max)：30V
Voltage - Output (Min/Fixed)：12V, 5V
Voltage - Output (Max)：-
Voltage Dropout (Max)：-
Current - Output：3A, 75mA
Current - Quiescent (Iq)：4.5 mA
Current - Supply (Max)：5.5 mA
PSRR：60dB (50Hz ~ 500Hz), 74dB (50Hz ~ 500Hz)
Control Features：Enable
Protection Features：Over Current, Over Temperature, Over Voltage
Operating Temperature：0°C ~ 125°C
Mounting Type：Through Hole
Package / Case：TO-220-5
Supplier Device Package：TO-220-5

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators datasheet and documents for LT1036CT

LT1036CT

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Overview

The LT1036CT is a dual-output linear voltage regulator manufactured by Analog Devices Inc. It provides two regulated outputs: 12V at 3A and 5V at 75mA. The device features a 2% output voltage tolerance and 60dB ripple rejection. It operates within an ambient temperature range of 0°C to 125°C and supports TTL and CMOS compatible logic control. The component is housed in a TO-220-5 through-hole package.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Feature Summary

Dual regulated outputs providing 12V at 3A and 5V at 75mA
Logic-controlled operation compatible with TTL and CMOS standards
High ripple rejection capability for stable power delivery

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Applications

Power supply systems requiring simultaneous 12V and 5V rails
Industrial equipment utilizing logic-controlled regulation
Embedded systems needing high-current 12V and low-current 5V supplies

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Procurement Notes

Verify the current lifecycle status before procurement, as this component may be obsolete or restricted. Confirm that the TO-220-5 through-hole package matches your PCB design requirements. Ensure thermal management solutions are adequate for the specified operating temperature range of 0°C to 125°C. Check for potential replacement parts if availability is limited.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Selection Notes

Select this component when a single IC solution is needed for generating both 12V and 5V voltages. The 3A capacity on the primary rail suits moderate load applications. Verify that the logic control interface aligns with the system's microcontroller or logic levels. Consider thermal dissipation needs due to the linear regulation topology.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Part Context

The LT1036 belongs to a family of dual-output regulators designed for applications requiring multiple voltage rails from a single source. It integrates two independent linear regulators into one package, simplifying board layout compared to using separate discrete regulators. The device emphasizes reliability with 100% thermal burn-in testing on all units.