LT1212CN#PBF

$13.15

Description：IC OPAMP GP 4 CIRCUIT 14DIP
Series：LT®
Mfr：Analog Devices Inc.
Package：Tube

SKU:8d93de8aa9e8 Category: Instrumentation, Op Amps, Buffer Amps Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LT1212CN#PBF is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC OPAMP GP 4 CIRCUIT 14DIP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for LT1212CN#PBF

Description：IC OPAMP GP 4 CIRCUIT 14DIP
Series：LT®
Mfr：Analog Devices Inc.
Package：Tube
Amplifier Type：General Purpose
Number of Circuits：4
Output Type：-
Slew Rate：7V/µs
Gain Bandwidth Product：14 MHz
Current - Input Bias：50 nA
Voltage - Input Offset：150 µV
Current - Supply：1.8mA (x4 Channels)
Current - Output / Channel：50 mA
Voltage - Supply Span (Min)：2.5 V
Voltage - Supply Span (Max)：36 V
Operating Temperature：-40°C ~ 85°C
Mounting Type：Through Hole
Package / Case：14-DIP (0.300", 7.62mm)
Supplier Device Package：14-PDIP

Instrumentation, Op Amps, Buffer Amps datasheet and documents for LT1212CN#PBF

LT1212CN#PBF

Instrumentation, Op Amps, Buffer Amps Overview

The LT1212CN#PBF is a quad precision operational amplifier manufactured by Analog Devices Inc. It features a gain-bandwidth product of 13 MHz and a slew rate of 7 V/µs. The device operates on supply voltages ranging from 2.5 V to 36 V. Key electrical specifications include an input offset voltage maximum of 275 mV, input bias current of 60 nA, and input noise voltage density of 12 nV/√Hz. It provides a minimum output drive current of 20 mA and consumes 1.3 mA per amplifier. The component is housed in a 14-pin PDIP package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Single-supply operation with input voltage range including ground
High DC precision eliminating the need for external trimming
Low input noise voltage and current characteristics
Large output drive capability suitable for low impedance loads

Instrumentation, Op Amps, Buffer Amps Applications

Active filters
Photo diode amplifiers
DAC current-to-voltage amplifiers
Battery-powered systems

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific ordering suffix against official manufacturer documentation to confirm package type and temperature rating. Ensure compatibility with required PCB footprint dimensions and thermal management strategies. Confirm that the selected variant meets all necessary environmental operating limits for the intended deployment scenario.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when high frequency performance is required alongside single-supply precision. Consider the LT1211 for dual-channel requirements or the LT1214 for higher slew rates. Evaluate power dissipation calculations carefully due to wide supply voltage ranges and ensure adequate thermal design for the chosen packaging option.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the LT1211/LT1212 family of single-supply precision op amps. It serves as the quad-channel counterpart to the dual-channel LT1211. The series is designed to eliminate trimming in most systems while providing high-frequency performance typically not found in single-supply amplifiers.