LT1963AIFE#TRPBF

$7.93

Description：IC REG LIN POS ADJ 1.5A 16TSSOP
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:963e02780905 Category: Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LT1963AIFE#TRPBF is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC REG LIN POS ADJ 1.5A 16TSSOP. Review the specifications below when checking this part for your BOM.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators specifications for LT1963AIFE#TRPBF

Description：IC REG LIN POS ADJ 1.5A 16TSSOP
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR),Cut Tape (CT)
Output Configuration：Positive
Output Type：Adjustable
Number of Regulators：1
Voltage - Input (Max)：20V
Voltage - Output (Min/Fixed)：1.21V
Voltage - Output (Max)：20V
Voltage Dropout (Max)：0.55V @ 1.5A
Current - Output：1.5A
Current - Quiescent (Iq)：1.5 mA
Current - Supply (Max)：120 mA
PSRR：63dB (120Hz)
Control Features：Enable
Protection Features：Over Current, Over Temperature, Reverse Polarity
Operating Temperature：-40°C ~ 125°C
Mounting Type：Surface Mount
Package / Case：16-TSSOP (0.173", 4.40mm Width) Exposed Pad
Supplier Device Package：16-TSSOP-EP

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators datasheet and documents for LT1963AIFE#TRPBF

LT1963AIFE#TRPBF

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Overview

The LT1963AIFE#TRPBF is a low dropout linear regulator from Analog Devices, packaged in a 16-lead TSSOP with an exposed pad. It provides an adjustable positive output voltage ranging from 1.21V to 20V and supports up to 1.5A of continuous output current. The device operates with an input voltage range of 2.1V to 20V and maintains a typical dropout voltage of 340mV at full load. It features a low quiescent current of 1mA and delivers 40µVRMS of output noise within the 10Hz to 100kHz bandwidth.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Feature Summary

Optimized for fast transient response to handle rapid load changes
Low noise performance suitable for sensitive analog circuits
Integrated protection against reverse input and reverse output voltages

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Applications

Battery-powered systems requiring efficient power management
Portable equipment needing stable regulation under varying loads
Dual supply applications where outputs may be pulled below ground

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Procurement Notes

Verify that the component matches the specified 16-TSSOP package with an exposed thermal pad. Confirm the lead-free finish designation (#TRPBF) aligns with manufacturing requirements. Ensure the supplier provides valid traceability documentation for the Analog Devices brand. Cross-reference the part number against official distributor catalogs to confirm authenticity before purchase.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Selection Notes

Select this model when an adjustable output voltage between 1.21V and 20V is required alongside high current capability. The 16-lead TSSOP package is appropriate for designs prioritizing thermal dissipation through the exposed pad. Consider the 1mA quiescent current for battery life optimization and the low noise profile for precision signal integrity needs.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Part Context

This component belongs to the LT1963A series of low dropout regulators manufactured by Analog Devices. The series includes fixed voltage variants and different package options such as TO-220 and SOT-223. The LT1963AIFE variant specifically utilizes the TSSOP form factor to accommodate surface-mount assembly processes while maintaining robust thermal performance.