LT6012ACGN#TRPBF

Instrumentation, Op Amps, Buffer Amps Overview

The LT6012ACGN#TRPBF is a quad precision operational amplifier in a 16-lead SSOP package. It features a maximum input offset voltage of 85µV and a drift of 0.8µV/°C. Supply current is 135µA per amplifier at 5V. Input bias current is 300pA maximum. The device operates on supplies from 2.7V to 36V with rail-to-rail output swing. Gain bandwidth product is 250kHz typical. Common mode rejection ratio is 120dB minimum.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Combines low noise and high precision input performance with low power consumption
• Input offset voltage trimmed for high accuracy over temperature and time
• Rail-to-rail output swing suitable for low voltage single supply applications
• Space saving 16-lead SSOP package configuration

Instrumentation, Op Amps, Buffer Amps Applications

• Thermocouple Amplifiers
• Precision Photo Diode Amplifiers
• Instrumentation Amplifiers
• Battery-Powered Precision Systems
• Low Voltage Precision Systems

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific ordering suffix matches the required temperature grade and packaging format. The #TRPBF suffix indicates tape and reel packaging with lead-free finish. Confirm the AC grade specifications align with your design requirements for offset voltage and drift. Ensure the 16-lead SSOP footprint matches your PCB layout constraints before finalizing procurement.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when quad channel precision is required alongside low power consumption. The AC grade offers tighter offset voltage specifications compared to standard grades. Verify that the input common mode range meets your signal requirements, as it does not extend fully to the negative rail. Consider the thermal characteristics of the SSOP package for your application environment.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the LT6011/LT6012 family of dual and quad precision op amps. The LT6012 variant provides four amplifiers in a single package. The AC grade specifies enhanced offset voltage performance. The GN package designation identifies the 16-lead plastic SSOP form factor used for space-constrained designs.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

LT6012CGN#TRPBF

Instrumentation, Op Amps, Buffer Amps FAQ

Does the LT6012 have rail-to-rail inputs?

No, the inputs are limited to operating between V– + 1V and V+ – 1.2V. Exceeding this range causes gain to drop to zero without phase reversal.

What is the maximum differential input voltage?

The absolute maximum differential input voltage is 10V. Internal protection diodes limit input current to approximately 10mA under these conditions.