LT6206IMS8#TRPBF

Video Amps And Modules Overview

The LT6206IMS8#TRPBF is a dual-channel high-speed voltage feedback operational amplifier from Analog Devices. It features a 100MHz gain-bandwidth product and a 450V/μs slew rate, optimized for single-supply operation with inputs including ground and rail-to-rail output swing. The device operates on supply voltages ranging from 2.7V to 12.6V and is specified at 3V, 5V, and ±5V supplies. It offers high channel separation of over 90dB at 10MHz and low power dissipation. This specific part number denotes the industrial temperature grade (-40°C to 85°C) packaged in an 8-lead MSOP format.

Video Amps And Modules Feature Summary

• High-speed performance with 100MHz gain-bandwidth product and 450V/μs slew rate
• Rail-to-rail output capability with input common mode range extending to ground
• Robust drive capability providing 50mA output current per channel
• High channel isolation exceeding 90dB at 10MHz frequency

Video Amps And Modules Applications

• Baseband video splitter and cable driver circuits
• Video line drivers for signal transmission
• Automotive display interface amplification
• RGB signal amplification stages
• Low voltage high-speed signal processing

Video Amps And Modules Procurement Notes

Verify that the ordering suffix IMS8 corresponds to the industrial temperature range (-40°C to 85°C) and tape-and-reel packaging configuration. Confirm the lead-free finish designation (#PBF) matches environmental compliance requirements. Ensure the package type is identified as an 8-lead plastic MSOP for correct footprint design.

Video Amps And Modules Selection Notes

Select this component when dual-channel high-speed amplification is required within a compact surface-mount package. It is suitable for designs needing rail-to-rail output swing and ground-referenced inputs. Consider the 450V/μs slew rate for fast transient response applications. Verify that the 50mA output current meets load driving requirements without excessive heat generation.

Video Amps And Modules Part Context

This device belongs to the LT6205/LT6206/LT6207 family of low-cost, single/dual/quad video operational amplifiers. While the LT6205 is available in a 5-pin SOT-23 and the LT6207 in a 16-pin SSOP, the LT6206 specifically utilizes an 8-lead MSOP package with standard op amp pinouts. All variants share similar electrical characteristics regarding bandwidth and slew rate.

Video Amps And Modules Replacement Considerations

Consult manufacturer documentation for direct substitutes. Parts such as LT6206CMS8#TRPBF (commercial grade) or LT6206HS8#TRPBF (automotive grade) may be considered if temperature ranges differ.