LT6207IGN#PBF

$4.48

Description：IC AMP VOLTAGE FEEDBACK 16SSOP
Series：-
Mfr：Analog Devices Inc.
Package：Tube

SKU:d548863ebfaf Category: Video Amps and Modules Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LT6207IGN#PBF is listed in the Video Amps And Modules range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC AMP VOLTAGE FEEDBACK 16SSOP. Review the specifications below when checking this part for your BOM.

Video Amps And Modules specifications for LT6207IGN#PBF

Description：IC AMP VOLTAGE FEEDBACK 16SSOP
Series：-
Mfr：Analog Devices Inc.
Package：Tube
Applications：Voltage Feedback
Output Type：Rail-to-Rail
Number of Circuits：4
Slew Rate：600V/µs
Current - Supply：4 mA
Current - Output / Channel：60 mA
Voltage - Supply, Single/Dual (±)：2.7V ~ 12.6V, ±1.35V ~ 6.3V
Mounting Type：Surface Mount
Package / Case：16-SSOP (0.154", 3.90mm Width)
Supplier Device Package：16-SSOP
-3db Bandwidth：-
Grade：-
Qualification：-

Video Amps And Modules datasheet and documents for LT6207IGN#PBF

LT6207IGN#PBF

Video Amps And Modules Overview

The LT6207IGN#PBF is a quad single-supply voltage feedback operational amplifier featuring a 100MHz gain-bandwidth product and 450V/μs slew rate. It operates on supplies from 2.7V to 12.6V, with inputs including ground and outputs swinging within 60mV of either rail. The device provides 50mA output current per channel and maintains over 90dB channel separation at 10MHz. It is specified for commercial (0°C to 70°C) and industrial (-40°C to 85°C) temperature ranges.

Video Amps And Modules Feature Summary

Rail-to-rail output capability with input common mode range extending to ground
High-speed performance with 100MHz gain-bandwidth product and 450V/μs slew rate
Robust drive capability delivering 50mA output current per amplifier
Excellent channel isolation exceeding 90dB at 10MHz

Video Amps And Modules Applications

Baseband video splitters and cable drivers
Video line drivers
Automotive display interfaces
RGB amplifiers
Low voltage high speed signal processing

Video Amps And Modules Procurement Notes

Verify the specific suffix IGN indicates the Industrial temperature grade (-40°C to 85°C) and the GN package type (16-lead Narrow Plastic SSOP). Confirm lead-free finish status via the #PBF designation. Ensure the application environment matches the specified operating range and that board layout adheres to high-frequency bypassing requirements.

Video Amps And Modules Selection Notes

Select this component when four independent channels are required in a compact SSOP footprint. It is suitable for designs needing rail-to-rail output swing on low-voltage single supplies. Consider the 100MHz bandwidth and 450V/μs slew rate for fast transient response needs. Verify that the 50mA drive current meets load requirements without excessive heat dissipation.

Video Amps And Modules Part Context

This part belongs to the LT6205/LT6206/LT6207 family of low-cost, single-supply video op amps. While the LT6205 offers a single channel in SOT-23 and the LT6206 provides dual channels in MSOP, the LT6207 integrates four amplifiers into a 16-pin SSOP package for space-constrained multi-channel applications.