LTC4231IMS-2#TRPBF

$3.33

Description：IC HOT SWAP CTRLR GP 12MSOP
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR)

SKU:d56861711b09 Category: Hot Swap Controllers Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LTC4231IMS-2#TRPBF is listed in the Hot Swap Controllers range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC HOT SWAP CTRLR GP 12MSOP. Review the specifications below when checking this part for your BOM.

Hot Swap Controllers specifications for LTC4231IMS-2#TRPBF

Description：IC HOT SWAP CTRLR GP 12MSOP
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR)
Type：Hot Swap Controller
Number of Channels：1
Internal Switch(s)：No
Applications：General Purpose
Features：Auto Retry
Programmable Features：Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Voltage - Supply：2.7V ~ 36V
Current - Output (Max)：-
Operating Temperature：-40°C ~ 85°C
Current - Supply：4 µA
Mounting Type：Surface Mount
Package / Case：12-TSSOP (0.118", 3.00mm Width)
Supplier Device Package：12-MSOP
Grade：-
Qualification：-

Hot Swap Controllers datasheet and documents for LTC4231IMS-2#TRPBF

LTC4231IMS-2#TRPBF

Hot Swap Controllers Overview

The LTC4231IMS-2#TRPBF is a micro-power hot-swap controller manufactured by Analog Devices Inc. It operates within a supply voltage range of 2.7 V to 36 V and features adjustable current limiting. The device draws a quiescent current of 4 uA and functions across an operating temperature range of -40°C to +85°C. Packaged in a 12-pin MSOP, it provides single-channel protection with auto-retry functionality.

Hot Swap Controllers Feature Summary

Micro-power operation with low quiescent current consumption
Adjustable current limiting for load protection
Auto-retry mechanism for transient fault recovery

Hot Swap Controllers Applications

Hot-swap applications requiring power distribution control
Systems needing input overvoltage and undervoltage detection
Backplane or mezzanine card insertion protection

Hot Swap Controllers Procurement Notes

Verify the specific suffix #TRPBF indicates tape-and-reel packaging when sourcing components. Confirm that the IMS-2 variant corresponds to the auto-retry configuration rather than latch-off. Ensure compatibility with the required 12-pin MSOP footprint during procurement planning.

Hot Swap Controllers Selection Notes

Select this component for designs requiring low standby power and automatic fault recovery. Compare against the IMS-1 variant if latch-off behavior is preferred instead of auto-retry. Verify that the 36 V maximum rating aligns with system bus voltages and that the MSOP package fits the PCB constraints.

Hot Swap Controllers Part Context

This part belongs to the LTC4231 series of hot-swap controllers from Analog Devices. It is functionally related to the LTC4231IMS-1 but differs in fault response logic. Evaluation boards such as DC2161A-B are designed specifically to demonstrate the performance characteristics of this auto-retry variant.