LTC6078IMS8#TRPBF

Instrumentation, Op Amps, Buffer Amps Overview

The LTC6078IMS8#TRPBF is a dual micropower precision operational amplifier in an 8-lead MSOP package. It features rail-to-rail input and output capabilities with a maximum offset voltage of 25µV and drift of 0.7µV/°C. The device operates on supply voltages from 2.7V to 5.5V, drawing 54µA per amplifier. Key electrical specifications include a gain-bandwidth product of 750kHz, 16nV/√Hz input noise voltage density, and 95dB minimum common-mode rejection ratio.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Combines low offset voltage and drift with extremely low input bias current for high-precision signal conditioning.
• Rail-to-rail input and output stages enable full dynamic range operation across the entire supply voltage span.
• Micropower consumption allows extended battery life in portable and energy-constrained applications.

Instrumentation, Op Amps, Buffer Amps Applications

• Photodiode Amplifier
• High Impedance Sensor Amplifier
• Microvolt Accuracy Threshold Detection
• Instrumentation Amplifiers
• Battery Powered Applications

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix #TRPBF indicates tape and reel packaging and lead-free compliance. Confirm the IMS8 designation corresponds to the 8-lead MSOP package variant. Ensure the temperature grade matches the required operating environment, as specifications vary between commercial and industrial grades.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when both ultra-low offset voltage and minimal input bias current are critical requirements simultaneously. It serves as a suitable alternative to zero-drift amplifiers where lower power consumption is prioritized over absolute DC accuracy. Consider the rail-to-rail capability if single-supply operation near ground or VDD is necessary.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the LTC6078/LTC6079 family of micropower precision amplifiers. The dual configuration (LTC6078) offers two independent channels in compact packages like MSOP and DFN. The series is designed to bridge the performance gap between traditional bipolar and CMOS amplifiers, providing superior precision at low power levels.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Public confirmed substitute part numbers: None identified in source material.