M80-4010605

Headers, Receptacles, Female Sockets Overview

The Harwin M80-4010605 is a Datamate J-Tek board connector plug featuring 6 positions with a 2.00mm pitch. It utilizes female sockets for signal connections and male pins for power, configured as a mixed-contact assembly. The unit employs straight solder terminals for through-hole mounting and incorporates a locking mechanism to secure the connection. Constructed with black polyphenylene sulfide insulation and gold-plated contacts, it supports a current rating of 3A and a voltage rating of 800V.

Headers, Receptacles, Female Sockets Feature Summary

• Mixed contact configuration combining female signal sockets and male power pins within a single housing.
• High-voltage capability rated at 800V with a 3A current carrying capacity.
• Secure mechanical retention via integrated locking features on the plug housing.
• Robust construction using glass-filled polyphenylene sulfide insulator material.

Headers, Receptacles, Female Sockets Applications

• High-voltage industrial control systems requiring reliable signal and power integration.
• Medical equipment interfaces demanding high dielectric strength and secure connections.
• Automotive electronics applications utilizing mixed-signal transmission requirements.
• Test and measurement instrumentation needing robust board-to-board interconnects.

Headers, Receptacles, Female Sockets Procurement Notes

Verify the specific pinout arrangement to ensure compatibility with mating receptacles, as mixed-contact configurations vary by position. Confirm that the solder termination style aligns with the target PCB layout and manufacturing process capabilities. Check for RoHS compliance status if environmental regulations apply to the end product. Ensure the locking mechanism does not interfere with adjacent components in the assembly design.

Headers, Receptacles, Female Sockets Selection Notes

Select this component when both high-voltage isolation and mixed signal-power transmission are required in a compact form factor. The 2.00mm pitch allows for dense packing while maintaining adequate spacing for 800V ratings. Consider the straight solder terminal orientation for vertical board stacking or panel mounting scenarios where space efficiency is critical compared to cable assemblies.

Headers, Receptacles, Female Sockets Part Context

This part belongs to the Harwin Datamate J-Tek series, designed for high-reliability interconnect solutions. The series is known for its modular design allowing various contact arrangements and termination styles. The M80-4010605 specifically addresses applications needing distinct separation between signal and power paths within a unified connector system, enhancing noise immunity and safety margins.

Headers, Receptacles, Female Sockets Replacement Considerations

Direct substitutes within the same series include M80-4010605 variants with different suffixes indicating altered contact plating or housing colors. Cross-series replacements from other manufacturers require careful verification of pitch, voltage ratings, and locking mechanisms to ensure functional equivalence without redesigning the host board.

Headers, Receptacles, Female Sockets FAQ

What is the maximum voltage rating for this connector?

The M80-4010605 is rated for up to 800V, suitable for high-voltage applications.

Does this connector use uniform contact types throughout?

No, it features a mixed-contact design with both female sockets and male pins.

How is the connector secured to the mating interface?

It utilizes a built-in locking mechanism to ensure a secure and vibration-resistant connection.