M83-LMT1M1N60-0000-000

Overview

The M83-LMT1M1N60-0000-000 is a Datamate J-Tek male header connector manufactured by Harwin. It features a 3-row configuration with 60 positions and a 2.00mm (0.079 inch) pitch. The component utilizes straight solder pins for through-hole mounting. Electrical ratings include a current capacity of 2.2A per contact and a voltage rating of 120V. The mating stacking heights are specified at 10.65mm and 12.85mm.

Feature Summary

• Datamate J-Tek series design with shrouded male pin headers
• Three-row arrangement providing high-density connectivity
• Straight solder termination for reliable PCB integration
• Guard security scanning capability for data integrity

Applications

• High-density board-to-board interconnections
• Industrial control systems requiring secure connections
• Data acquisition modules needing guard security
• Automated test equipment interfaces

Procurement Notes

Verify the specific ordering suffix to ensure correct pin count, row configuration, and tail length. Confirm that the required stacking height matches the application's mechanical constraints. Check for compatibility with corresponding female receptacles in the same Datamate J-Tek family. Ensure the through-hole soldering process aligns with the specified pin type and material properties.

Selection Notes

Select this component when a 60-position, three-row male header is required. The 2.00mm pitch suits applications needing moderate density without excessive footprint usage. Consider the 2.2A per contact rating for power distribution needs. Evaluate the available stacking heights against the system's vertical space limitations. Verify that the guard security feature is necessary for the specific signal integrity requirements.

Part Context

This part belongs to the Harwin Datamate J-Tek family, known for robust rectangular connectors. The M83 prefix indicates a male header variant within this series. The model number specifies the 60-pin, three-row configuration with standard tail lengths. This series is widely used in industrial and commercial electronics for reliable interconnect solutions.

Replacement Considerations

Direct substitutes must match the 60-pin, 3-row, 2.00mm pitch specification. Compatible alternatives include other Harwin Datamate J-Tek male headers with identical electrical ratings. Ensure any replacement supports the same through-hole mounting method and guard security features if required.

FAQ

What is the current rating per contact for this connector?

The current rating is 2.2A per contact.

Does this connector support guard security scanning?

Yes, the Datamate J-Tek series includes guard security scanning capabilities.

What are the available mating stacking heights?

The specified mating stacking heights are 10.65mm and 12.85mm.