MA-ZX3-20-2I-D10-R7

Overview

The Enclustra MA-ZX3-20-2I-D10-R7 is a Mars ZX3 System-on-Module (SOM) based on the AMD Zynq XC7Z020-2CLG484I All Programmable SoC. It integrates an Artix-7 FPGA fabric with dual ARM Cortex-A9 processors operating up to 800MHz. The module provides 1GB of DDR3 SDRAM, 64MB of Quad SPI flash, and 512MB of NAND flash. It features 108 user I/Os, Gigabit Ethernet, USB 2.0 OTG, and a real-time clock within a 30x67.6mm SO-DIMM form factor. Designed for industrial environments, it supports a single 3.3V supply and operates within a temperature range of -40°C to +85°C.

Feature Summary

• AMD Zynq XC7Z020-2CLG484I SoC with dual ARM Cortex-A9 cores and Artix-7 FPGA fabric
• 1GB DDR3 SDRAM, 64MB QSPI Flash, and 512MB NAND Flash memory
• Integrated Gigabit Ethernet PHY and USB 2.0 On-The-Go controller
• Industrial temperature rating (-40°C to +85°C) with 108 user I/Os

Applications

• Industrial automation and control systems
• Embedded vision and machine learning edge processing
• Communication infrastructure and software-defined radio
• Medical imaging and diagnostic equipment

Procurement Notes

Verify the specific revision suffix '-R7' against the manufacturer's current documentation to ensure compatibility with baseboard designs and firmware. Confirm that the EN-number EN102151 corresponds to the exact hardware configuration required for your application. Ensure proper ESD handling procedures are followed during installation.

Selection Notes

Select this model when an industrial-grade Zynq-7000 solution with 1GB RAM is required. Compare with the MA-ZX3-20-1C-D9 variant if commercial temperature ranges suffice or lower memory configurations are acceptable. Verify that the 200-pin SO-DIMM connector height accommodates the mechanical constraints of the target carrier board design.

Part Context

This component belongs to the Enclustra Mars ZX3 family, which utilizes the AMD Zynq-7000 series. It serves as a complete embedded processing system, reducing development effort compared to custom SoC hardware. The module is designed for quick integration into target applications using compatible Mars baseboards.

Replacement Considerations

Direct replacements include other variants within the Mars ZX3 family, such as the MA-ZX3-20-1C-D9-R7, subject to differences in temperature range and memory capacity. Cross-family migration to newer Zynq models requires significant hardware and software redesign.