MAF1608GAD121LTAH0

Chip Ferrite Bead Overview

The MAF1608GAD121LTAH0 is a single-line ferrite bead from the TDK MAF series, designed for audio line noise suppression. It features a 0603 (1608 metric) surface-mount package with dimensions of 1.60mm length, 0.80mm width, and a maximum height of 0.75mm. The component provides an impedance of 20 ohms at its rated test frequency and supports a maximum DC current of 3.2A. It has a low DC resistance of 0.027 ohms and operates within a temperature range of -55°C to +125°C.

Chip Ferrite Bead Feature Summary

• Engineered specifically for audio line noise suppression applications
• High current handling capability suitable for power-sensitive circuits
• Compact 0603 footprint for space-constrained surface mount designs

Chip Ferrite Bead Applications

• Audio circuit noise filtering
• Signal line protection in consumer electronics
• Power supply input filtering for audio components

Chip Ferrite Bead Procurement Notes

Verify the specific suffix LTAH0 against the manufacturer's latest datasheet to confirm packaging and material compliance. Ensure the selected distributor source aligns with the required reel or cut tape format. Cross-reference the impedance value of 20 ohms with design requirements to prevent signal attenuation issues in sensitive audio paths.

Chip Ferrite Bead Selection Notes

Select this component when high current capacity is required alongside effective audio band noise suppression. The 3.2A rating distinguishes it from lower-current signal line beads. Verify that the 0603 package size fits the PCB layout constraints and that the operating temperature range meets environmental specifications.

Chip Ferrite Bead Part Context

This part belongs to the TDK MAF series, which focuses on high-current ferrite beads. Unlike the MMZ series often used for general signal lines, the MAF series is optimized for higher current loads while maintaining noise suppression capabilities in compact packages.

Chip Ferrite Bead Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Consult TDK technical support for direct equivalents within the MAF series.