MAX13086EESD+T

Drivers, Receivers, Transceivers Overview

The MAX13086EESD+T is a +5.0V, full-duplex RS-485 transceiver featuring one driver and one receiver in a 14-pin SO package. It supports data rates up to 16Mbps with unrestricted slew rates. The device provides ±15kV ESD protection on I/O pins and incorporates fail-safe circuitry that guarantees a logic-high receiver output when inputs are open or shorted. Hot-swap capability prevents false transitions during bus insertion. Operating supply voltage ranges from 4.5V to 5.5V, with a typical quiescent current of 1.2mA. The component operates within an extended temperature range of -40°C to +85°C.

Drivers, Receivers, Transceivers Feature Summary

• Full-duplex communication architecture supporting simultaneous transmission and reception
• Hot-swap input structures on DE and RE pins to eliminate bus disturbances during power-up
• True fail-safe receiver design ensuring high output state under undefined bus conditions
• Enhanced ESD protection rated at ±15kV for human body model on RS-485 I/O pins

Drivers, Receivers, Transceivers Applications

• Utility meters
• Industrial control systems
• Telecommunications equipment
• Security systems
• Profibus networks

Drivers, Receivers, Transceivers Procurement Notes

Verify the specific suffix 'ESD+' confirms the lead-free/RoHS-compliant 14-pin SO package variant. Confirm the operating temperature grade corresponds to the '-EE-' designation for the -40°C to +85°C range. Ensure the datasheet revision matches the required electrical characteristics for the 16Mbps mode configuration.

Drivers, Receivers, Transceivers Selection Notes

Select this component for applications requiring full-duplex RS-485 connectivity without slew-rate limitations. Verify compatibility with +5.0V logic levels and ensure the system accommodates the 14-pin SO footprint. Consider the hot-swap feature if board insertion into powered backplanes is anticipated. Confirm thermal management requirements align with the specified junction temperature limits.

Drivers, Receivers, Transceivers Part Context

This part belongs to the MAX13080E–MAX13089E family of +5.0V RS-485 transceivers. Unlike the MAX13080E/MAX13081E/MAX13082E which limit slew rates for lower speeds, the MAX13086E allows unrestricted driver slew rates to achieve 16Mbps. It differs from half-duplex variants like the MAX13082E by maintaining separate transmit and receive paths.

Drivers, Receivers, Transceivers Replacement Considerations

The MAX13087EESD+ serves as a direct functional substitute within the same family, offering identical specifications and pinout configurations.