MAX13342EEBC-T

$1.29

Description：IC TXRX USB FS 3WIRE 12-UCSP
Mfr：Analog Devices Inc./Maxim Integrated

SKU:34089e0fffed Category: Drivers, Receivers, Transceivers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX13342EEBC-T is listed in the Drivers, Receivers, Transceivers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC TXRX USB FS 3WIRE 12-UCSP. Review the specifications below when checking this part for your BOM.

Drivers, Receivers, Transceivers specifications for MAX13342EEBC-T

Description：IC TXRX USB FS 3WIRE 12-UCSP
Mfr：Analog Devices Inc./Maxim Integrated
Package：Bulk
Series：*
Type：-
Protocol：-
Number of Drivers/Receivers：-
Duplex：-
Data Rate：-
Voltage - Supply：-
Operating Temperature：-
Mounting Type：-
Package / Case：-
Supplier Device Package：-
Receiver Hysteresis：-
Grade：-
Qualification：-

Drivers, Receivers, Transceivers datasheet and documents for MAX13342EEBC-T

MAX13342EEBC-T

Drivers, Receivers, Transceivers Overview

The MAX13342EEBC-T is a USB-compliant full-speed transceiver designed for low-voltage ASICs. It operates with system supply voltages (VL) from +2.3V to +3.6V and VBUS from +4.0V to +5.5V. The device supports 12Mbps data rates and includes an internal 3.3V regulator, a 1.5kΩ D+ pullup resistor, and ±15kV HBM ESD protection on D+, D-, and VBUS. It utilizes a 3-wire DAT/SE0 interface and features a UCSP™ 12-pin package measuring 2.0mm x 1.5mm. Operating temperature range is -40°C to +85°C.

Drivers, Receivers, Transceivers Feature Summary

USB 2.0 Full-Speed Compliant Transceiver
Internal Pullup Resistor and 3-Wire Interface
VBUS Detection and Enumeration Control
Low-Power Suspend Mode

Drivers, Receivers, Transceivers Applications

PDAs
PC Peripherals
Cellular Telephones
Data Cradles
MP3 Players

Drivers, Receivers, Transceivers Procurement Notes

Verify the specific suffix EEBC corresponds to the UCSP 12-pin package configuration. Confirm lead-free status indicated by the plus sign in ordering codes if required. Ensure compatibility with the 2.3V to 3.6V logic supply voltage range for the target application.

Drivers, Receivers, Transceivers Selection Notes

Select this component for applications requiring direct USB connection with minimal external components. The integrated 3.3V regulator and D+ pullup simplify design. Consider the UCSP package size for space-constrained portable devices. Verify that the 3-wire interface matches the host controller capabilities.

Drivers, Receivers, Transceivers Part Context

This part belongs to the MAX13342E/MAX13345E family of 3-wire interface full-speed USB transceivers. The MAX13342 variant provides low output impedance for multiplexing, while the MAX13345 includes internal series resistors for direct connector wiring. Both share similar control interfaces and power management features.