MAX14936DAWE+

Digital Isolators Overview

The MAX14936DAWE+ is a four-channel digital isolator utilizing capacitive coupling technology, housed in a 16-pin SOIC-Wide package. It supports a unidirectional signal configuration with a data rate of 1 Mbps and an insulation voltage of 5000 Vrms. The device operates on a supply voltage ranging from 1.71 V to 5.5 V, drawing 18 mA of operating current. Key electrical parameters include a maximum propagation delay of 55.3 ns and a pulse width distortion of 4.5 ns. It functions within a temperature range of -40°C to +125°C.

Digital Isolators Feature Summary

• Provides galvanic isolation via capacitive coupling for noise immunity
• Supports high common-mode transient rejection capabilities
• Features unidirectional channel configuration for signal directionality

Digital Isolators Applications

• Industrial process control systems requiring signal isolation
• Medical equipment needing patient safety isolation barriers
• Power electronics monitoring circuits

Digital Isolators Procurement Notes

Verify the specific suffix 'DAWE+' against official Analog Devices documentation to confirm the 1 Mbps data rate variant. Ensure the component matches the 16-SOIC package dimensions and RoHS compliance status listed in the datasheet. Confirm availability status as distribution channels may indicate limited stock or discontinuation phases.

Digital Isolators Selection Notes

Select this component when a low-speed, cost-effective isolation solution is required for unidirectional signals. Compare the 1 Mbps speed against higher-speed variants like the MAX14936FAWE+ if system timing demands exceed 1 Mbps. Verify that the 5000 Vrms isolation rating meets the specific safety standards required by the target application environment.

Digital Isolators Part Context

This part belongs to the MAX14936 series of general-purpose digital isolators manufactured by Analog Devices under the Maxim Integrated brand. The series offers various speed grades and configurations to suit different interface requirements while maintaining a consistent pinout and package style for design flexibility.

Digital Isolators Replacement Considerations

Check for direct cross-references such as the MAX14936BAWE+ for higher speed (25 Mbps) or MAX14936FAWE+ for ultra-high speed (150 Mbps) applications. Ensure any substitute maintains the same 16-SOIC footprint and unidirectional channel architecture.