MAX202EWE

$2.02

Description：IC TRANSCEIVER FULL 2/2 16SOIC
Mfr：Analog Devices Inc./Maxim Integrated

SKU:1f2137b55f5b Category: Drivers, Receivers, Transceivers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX202EWE is listed in the Drivers, Receivers, Transceivers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC TRANSCEIVER FULL 2/2 16SOIC. Review the specifications below when checking this part for your BOM.

Drivers, Receivers, Transceivers specifications for MAX202EWE

Description：IC TRANSCEIVER FULL 2/2 16SOIC
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube
Series：-
Type：Transceiver
Protocol：RS232
Number of Drivers/Receivers：2月2日
Duplex：Full
Data Rate：120Kbps
Voltage - Supply：4.5V ~ 5.5V
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：16-SOIC (0.295", 7.50mm Width)
Supplier Device Package：16-SOIC
Receiver Hysteresis：500 mV
Grade：-
Qualification：-

Drivers, Receivers, Transceivers datasheet and documents for MAX202EWE

MAX202EWE

Drivers, Receivers, Transceivers Overview

The MAX202EWE+ is a dual driver/receiver RS-232 transceiver from the Analog Devices/MAXIM family, designed for single +5V supply operation. It features an integrated charge pump that generates ±10V levels from the VCC input, eliminating the need for external bipolar supplies. The device supports data rates up to 120kbps and includes two drivers and two receivers. It operates within a voltage range of 4.5V to 5.5V with a typical supply current of 8mA to 15mA. The component is housed in a 16-pin Wide SO package and functions across an industrial temperature range of -40°C to +85°C.

Drivers, Receivers, Transceivers Feature Summary

Integrated charge pump circuitry enables single-supply operation without requiring external bipolar power sources.
Drivers maintain specified EIA/TIA-232E output signal levels at high data rates under standard loading conditions.
Receivers provide TTL/CMOS compatible outputs with guaranteed thresholds that improve noise margins.

Drivers, Receivers, Transceivers Applications

Battery-powered equipment requiring low-power serial communication
Handheld devices utilizing RS-232 interfaces
Portable diagnostics equipment

Drivers, Receivers, Transceivers Procurement Notes

Verify the specific suffix 'EWE+' against official documentation to confirm the wide SOIC package and extended temperature rating. Ensure the ordering part number matches the exact manufacturer designation to avoid confusion with non-RoHS or different package variants within the same series.

Drivers, Receivers, Transceivers Selection Notes

Select this component when a dual-channel RS-232 interface is required with minimal external capacitance. It is suitable for designs constrained by board space where integrating the charge pump reduces the bill of materials. Verify that the application does not require shutdown modes or higher data speeds exceeding 120kbps.

Drivers, Receivers, Transceivers Part Context

This device belongs to the MAX200-MAX209 family of +5V RS-232 transceivers. These components share a common architecture featuring internal voltage conversion. The MAX202 specifically provides two drivers and two receivers, distinguishing it from other members like the MAX200 which offers five drivers.