MAX4386EEUD+

Video Amps And Modules Overview

The MAX4386EEUD+ is a quad, unity-gain stable voltage-feedback operational amplifier from the MAX4385E/MAX4386E family. It operates from a single 5V supply with a common-mode input range extending beyond VEE. Key electrical specifications include a 230MHz small-signal bandwidth, 450V/µs slew rate, and 5.5mA quiescent current per amplifier. The device features rail-to-rail outputs, ±15kV ESD protection, and low differential gain/phase errors of 0.02%/0.01°. It is housed in a 14-pin TSSOP package.

Video Amps And Modules Feature Summary

• High-speed performance with 230MHz bandwidth and 450V/µs slew rate
• Robust ±15kV ESD protection on inputs and outputs
• Rail-to-rail output capability with ground-sensing inputs
• Ultra-low differential gain and phase error for video applications

Video Amps And Modules Applications

• Video line drivers
• Surveillance video systems
• Analog-to-digital converter interfaces
• Video routing and switching systems
• CCD imaging systems

Video Amps And Modules Procurement Notes

Verify the specific ordering suffix to confirm the package type and temperature range. Ensure the design accounts for the single 5V supply requirement and proper power-supply bypassing using 0.1µF and 2.2µF capacitors near the pins.

Video Amps And Modules Selection Notes

Select this component when high-speed signal processing with robust ESD tolerance is required. The quad configuration reduces board space compared to single amplifiers. Consider the 5V single-supply operation and rail-to-rail output swing when designing the power architecture.

Video Amps And Modules Part Context

This part belongs to the MAX4385E/MAX4386E series of low-cost, high-speed op amps. The MAX4386E specifically denotes the quad-channel version, while the MAX4385E is the single-channel variant. Both share identical electrical characteristics and are designed for video and communications applications.

Video Amps And Modules Replacement Considerations

The MAX4385EEUK+T is a single-channel alternative within the same family offering identical electrical performance but in a SOT-23-5 package. Designers requiring multiple channels may need to use four instances of the MAX4385E instead of one MAX4386E.

Video Amps And Modules FAQ

What is the input common-mode voltage range?

The input common-mode voltage range extends from (VEE - 0.2V) to (VCC - 2.25V), allowing ground sensing in single-supply applications.

How does the device handle capacitive loads?

The amplifier is optimized for AC performance but may oscillate with highly reactive loads. An isolation resistor (typically 10Ω to 15Ω) should be placed between the output and the capacitive load to ensure stability.

What ESD standards does the device comply with?

The device complies with ±15kV IEC 1000-4-2 Air-Gap Discharge, ±8kV IEC 1000-4-2 Contact Discharge, and ±15kV Human Body Model standards.