MAX452CSA

$4.00

Description：IC AMP VOLTAGE FEEDBACK 8SOIC
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube

SKU:f9f84a271f64 Category: Video Amps and Modules Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX452CSA is listed in the Video Amps And Modules range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC AMP VOLTAGE FEEDBACK 8SOIC. Review the specifications below when checking this part for your BOM.

Video Amps And Modules specifications for MAX452CSA

Description：IC AMP VOLTAGE FEEDBACK 8SOIC
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube
Applications：Voltage Feedback
Output Type：-
Number of Circuits：1
Slew Rate：300V/µs
Current - Supply：25 mA
Current - Output / Channel：20 mA
Voltage - Supply, Single/Dual (±)：±4.5V ~ 5.5V
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
-3db Bandwidth：50 MHz
Grade：-
Qualification：-

Video Amps And Modules datasheet and documents for MAX452CSA

MAX452CSA

Video Amps And Modules Overview

The MAX452CSA is a CMOS video multiplexer and amplifier manufactured by Analog Devices Inc./Maxim Integrated. It integrates a high-speed video amplifier with a multiplexer in an 8-pin SOIC package. The device features a 3dB bandwidth of 50 MHz, supporting video signal processing applications. It operates on a single supply voltage ranging from 4.5 V to 5.5 V, drawing a typical operating current of 25 mA. The component dissipates up to 320 mW of power and functions within a commercial temperature range of 0°C to +70°C.

Video Amps And Modules Feature Summary

Integrates a 50 MHz video amplifier with a multiplexer for compact signal routing
CMOS technology ensures low power consumption suitable for battery-operated systems
Single-supply operation simplifies power design requirements

Video Amps And Modules Applications

Video signal multiplexing
75 ohm cable drivers
Driving flash converters
Video crosspoint switches

Video Amps And Modules Procurement Notes

Verify the specific suffix 'CSA' against official documentation to confirm the industrial/commercial temperature rating and package variant. Confirm RoHS compliance status as historical data may vary. Check for obsolescence notices or lifecycle changes from Analog Devices, as older Maxim products often transition to limited availability or replacement series.

Video Amps And Modules Selection Notes

Select this component when a combined video amplification and switching function is required in a small footprint. Ensure the 50 MHz bandwidth meets the signal frequency requirements. Verify that the single 5V supply constraint aligns with the system power architecture. Consider the 25 mA quiescent current impact on total system power budget compared to lower-power alternatives.

Video Amps And Modules Part Context

The MAX452 belongs to the Maxim Integrated video multiplexer family, designed for analog video signal handling. It combines the functionality of a buffer amplifier and a switch to reduce board space. This specific part number represents the standard SOIC-8 package version intended for surface-mount assembly in consumer and industrial video equipment.