MAX4535ESD

Description：IC SW DPST-NOX2 400OHM 14SOIC
Series：-

SKU:e16fbed07ba9 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4535ESD is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SW DPST-NOX2 400OHM 14SOIC. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4535ESD

Description：IC SW DPST-NOX2 400OHM 14SOIC
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：DPST - NO
Multiplexer/Demultiplexer Circuit：2:01
On-State Resistance (Max)：400Ohm
Channel-to-Channel Matching (ΔRon)：2Ohm
Voltage - Supply, Single (V+)：9V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：275ns, 200ns
-3db Bandwidth：-
Charge Injection：1pC
Channel Capacitance (CS(off), CD(off))：5pF, 4pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-53dB @ 1MHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Package / Case：14-SOIC (0.154", 3.90mm Width)
Supplier Device Package：14-SOIC
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4535ESD

MAX4535ESD

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4535ESD is a dual 2-to-1 fault-protected multiplexer housed in a 14-pin narrow SOIC package. It operates with ±4.5V to ±20V dual supplies or +9V to +36V single supply, covering an industrial temperature range of -40°C to +85°C. The device features a maximum on-resistance of 400Ω and channel matching within 10Ω. It provides ±40V overvoltage protection when power is off and ±25V protection when powered. Key electrical parameters include a typical charge injection of 1pC, NO_ off-capacitance of 5pF, COM_ off-capacitance of 6.5pF, and off-isolation of -53dB at 1MHz.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Fault-protected inputs handle signals exceeding supply rails without damage
Rail-to-rail signal handling capability for full voltage swing operation
TTL/CMOS-compatible logic inputs ensure broad digital interface compatibility
No power-supply sequencing required for safe system startup

Analog Switches, Multiplexers, Demultiplexers Applications

Data-acquisition systems
Industrial and process control
Avionics
Signal routing
Redundant/backup systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix 'ESD' corresponds to the 14-pin narrow SOIC package and the -40°C to +85°C operating temperature range. Confirm that the component meets RoHS compliance standards if required by the manufacturing environment. Ensure the source documentation matches the Analog Devices/Maxim Integrated datasheet specifications for this exact part number.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when dual independent 2-to-1 switching is required alongside high-voltage fault tolerance. The narrow SOIC package suits applications with limited board space where through-hole mounting is not feasible. Verify that the 400Ω maximum on-resistance aligns with the signal integrity requirements of the target circuit design.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the MAX4534/MAX4535 family of fault-protected multiplexers. While the MAX4534 offers a single 4-to-1 configuration, the MAX4535 provides two independent 2-to-1 channels. Both share identical fault protection mechanisms and electrical characteristics, differing only in channel count and internal pin mapping.