MAX457CPA

Description：IC AMP GENERAL PURPOSE 8DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube

SKU:d0b237e09a1f Category: Video Amps and Modules Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX457CPA is listed in the Video Amps And Modules range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC AMP GENERAL PURPOSE 8DIP. Review the specifications below when checking this part for your BOM.

Video Amps And Modules specifications for MAX457CPA

Description：IC AMP GENERAL PURPOSE 8DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Applications：General Purpose
Output Type：-
Number of Circuits：2
Slew Rate：300V/µs
Current - Supply：35 mA
Current - Output / Channel：20 mA
Voltage - Supply, Single/Dual (±)：±4.5V ~ 5.5V
Mounting Type：Through Hole
Package / Case：8-DIP (0.300", 7.62mm)
Supplier Device Package：8-PDIP
-3db Bandwidth：70 MHz
Grade：-
Qualification：-

Video Amps And Modules datasheet and documents for MAX457CPA

MAX457CPA

Video Amps And Modules Overview

The MAX457CPA is a dual-channel video amplifier integrated circuit manufactured by Analog Devices Inc./Maxim Integrated. It features two independent operational amplifiers designed for high-speed video signal processing applications. The device operates within a supply voltage range of 3V to 12V, supporting both single and dual power configurations. Key electrical characteristics include a bandwidth of 70MHz and a slew rate of 300V/μs, enabling rapid signal transitions. It is housed in an 8-pin PDIP package suitable for through-hole mounting.

Video Amps And Modules Feature Summary

Dual-channel architecture providing two independent video amplifiers on a single chip
High-speed performance with 70MHz bandwidth and 300V/μs slew rate
Flexible power supply operation supporting 3V to 12V ranges

Video Amps And Modules Applications

Video signal buffering and amplification
Active filter circuits requiring high slew rates
General-purpose analog signal conditioning

Video Amps And Modules Procurement Notes

Verify the specific suffix 'CPA' to confirm the 8-pin PDIP package and commercial temperature grade. Cross-reference the manufacturer part number with official Analog Devices documentation to ensure authenticity, as this component may be subject to obsolescence or limited availability status.

Video Amps And Modules Selection Notes

Select this component when dual-channel video amplification is required with moderate speed specifications. Ensure the application demands a 70MHz bandwidth and 300V/μs slew rate. Verify that the 8-pin PDIP footprint aligns with the PCB design constraints and that the operating temperature range meets system requirements.

Video Amps And Modules Part Context

This device belongs to the Maxim Integrated video amplifier family, designed for consumer electronics and industrial video equipment. It serves as a cost-effective solution for basic video signal routing and amplification tasks where high precision is not the primary requirement compared to higher-end professional video ICs.