MAX4591CPE

$12.28

Description：IC SWITCH SPST-NCX4 20OHM 16DIP
Series：-

SKU:dee5ca3a96f8 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4591CPE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPST-NCX4 20OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4591CPE

Description：IC SWITCH SPST-NCX4 20OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube
Switch Circuit：SPST - NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：20Ohm
Channel-to-Channel Matching (ΔRon)：500mOhm
Voltage - Supply, Single (V+)：3V ~ 16V
Voltage - Supply, Dual (V±)：-
Switch Time (Ton, Toff) (Max)：80ns, 45ns
-3db Bandwidth：-
Charge Injection：2pC
Channel Capacitance (CS(off), CD(off))：9pF, 9pF
Current - Leakage (IS(off)) (Max)：100pA
Crosstalk：-85dB @ 10MHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4
Grade：-
Qualification：-

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4591CPE

MAX4591CPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4591CPE is a high-speed, precision, quad single-pole/single-throw (SPST) analog switch designed for +12V or +15V single-supply operation. It features four normally closed switches with a maximum on-resistance of 20Ω at +12V and 16Ω at +15V. The device guarantees a maximum channel-to-channel resistance match of 1Ω and flatness of 1.75Ω over the signal range. Switching speeds are fast, with turn-on time ≤80ns and turn-off time ≤45ns. Leakage current is limited to 100pA max, and charge injection is capped at 5pC max. It operates within a temperature range of 0°C to +70°C in a 16-pin Plastic DIP package.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Low on-resistance with guaranteed matching and flatness
Fast switching times for high-speed applications
Low leakage and minimal charge injection
High electrostatic discharge protection

Analog Switches, Multiplexers, Demultiplexers Applications

Test Equipment
Sample-and-Hold Circuits
Disk Drives
Guidance and Control Systems
Tape Drives

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix 'CPE' corresponds to the 16-pin Plastic DIP package and the commercial temperature range of 0°C to +70°C. Ensure the design requires the normally closed configuration unique to the MAX4591 variant. Confirm supply voltage requirements align with the specified +12V or +15V single-supply operation limits.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a quad SPST switch with normally closed logic is required. It is suitable for applications demanding low on-resistance variation and fast switching under single-supply conditions. Consider the MAX4592 or MAX4593 if normally open or mixed configurations are needed instead. Verify that the 16-pin DIP package fits the board layout constraints.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the MAX4591/MAX4592/MAX4593 family of high-speed, single-supply, quad SPST analog switches from Analog Devices Inc./Maxim Integrated. The family shares similar electrical characteristics but differs in switch logic states: MAX4591 is normally closed, MAX4592 is normally open, and MAX4593 offers a mix of two NO and two NC switches.