MAX4604EPE+

$7.94

Description：IC SWITCH SPST-NC X 4 4OHM 16DIP
Series：-

SKU:f24f67a232d1 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4604EPE+ is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPST-NC X 4 4OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4604EPE+

Description：IC SWITCH SPST-NC X 4 4OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SPST - NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：4Ohm
Channel-to-Channel Matching (ΔRon)：200mOhm
Voltage - Supply, Single (V+)：4.5V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：120ns, 130ns
-3db Bandwidth：-
Charge Injection：225pC
Channel Capacitance (CS(off), CD(off))：34pF, 34pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-60dB @ 1MHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4604EPE+

MAX4604EPE+

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4604EPE+ is a quad single-pole single-throw (SPST) normally closed analog switch manufactured by Analog Devices Inc./Maxim Integrated. It operates from a single supply of +4.5V to +36V or dual supplies of ±4.5V to ±20V. The device features a maximum on-resistance of 5Ω, with guaranteed channel matching and flatness of 0.5Ω max. Key electrical parameters include a turn-on time of 120ns, turn-off time of 130ns, off-leakage current of 0.5nA max at +85°C, and charge injection of 225pC. It is housed in a 16-PDIP package and supports an operating temperature range of -40°C to +85°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Rail-to-Rail signal handling capability for low-distortion applications
TTL/CMOS-compatible control inputs ensuring logic compatibility
Guaranteed ESD protection exceeding 2000V per Method 3015.7

Analog Switches, Multiplexers, Demultiplexers Applications

Reed relay replacement
PBX and PABX systems
Test equipment
Audio-signal routing
Communication systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the component status as discontinued before procurement planning. Confirm that the specific ordering suffix corresponds to the required temperature range and package type. Ensure that design-in requirements align with the absolute maximum ratings provided in the datasheet to prevent permanent damage during operation.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a normally closed configuration is required within a quad SPST analog switch family. Compare against the MAX4605 (normally open) and MAX4606 (mixed NC/NO) variants if circuit topology differs. Verify that the 5Ω on-resistance and 120ns switching speed meet the system's performance constraints.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the MAX4604/MAX4605/MAX4606 series of 5Ω quad CMOS analog switches. The 'E' suffix indicates the extended industrial temperature range (-40°C to +85°C), while the 'P' suffix denotes the 16-pin Plastic DIP package. The '+' suffix signifies compliance with RoHS standards.