MAX4661CPE

$4.57

Description：IC SWITCH SPST-NCX4 2.5OHM 16DIP
Series：-

SKU:53fb1e5a6d2f Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4661CPE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPST-NCX4 2.5OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4661CPE

Description：IC SWITCH SPST-NCX4 2.5OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube
Switch Circuit：SPST - NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：2.5Ohm
Channel-to-Channel Matching (ΔRon)：100mOhm
Voltage - Supply, Single (V+)：4.5V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：275ns, 175ns
-3db Bandwidth：-
Charge Injection：300pC
Channel Capacitance (CS(off), CD(off))：55pF, 55pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-59dB @ 1MHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4661CPE

MAX4661CPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4661CPE is a quad, single-pole single-throw (SPST) CMOS analog switch housed in a 16-pin Plastic DIP package. It features four normally closed switches with a maximum on-resistance of 2.5Ω and an off-leakage current of 5nA at +85°C. The device operates from a single +4.5V to +36V supply or dual ±4.5V to ±20V supplies. Electrical characteristics include a turn-on time of up to 400ns and a turn-off time of up to 300ns under dual supply conditions. The component supports TTL/CMOS logic compatibility via a separate logic supply pin.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Four independent SPST switches configured as normally closed
Low on-resistance with guaranteed matching and flatness over the signal range
Rail-to-rail analog signal handling capability
Separate logic supply pin for TTL/CMOS compatibility

Analog Switches, Multiplexers, Demultiplexers Applications

Reed relay replacement
Avionics systems
Test equipment
ADC systems
Audio-signal routing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'C' indicates the commercial temperature range of 0°C to +70°C. Confirm the 'P' suffix corresponds to the 16-pin Plastic DIP package. Ensure the datasheet revision matches the required specifications before procurement.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this part when low distortion and high channel matching are required. Verify that the normally closed configuration aligns with the circuit design. Check if the 2.5Ω on-resistance meets the application's voltage drop requirements.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX4661/MAX4662/MAX4663 family of quad analog switches. The MAX4661 variant specifically provides four normally closed channels, distinguishing it from the MAX4662 (normally open) and MAX4663 (mixed) configurations within the same series.