MAX4664CPE+

$8.13

Description：IC SWITCH SPST-NC X 4 4OHM 16DIP
Series：-

SKU:ccdf60a79348 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4664CPE+ is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPST-NC X 4 4OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4664CPE+

Description：IC SWITCH SPST-NC X 4 4OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SPST - NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：4Ohm
Channel-to-Channel Matching (ΔRon)：200mOhm
Voltage - Supply, Single (V+)：4.5V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：275ns, 175ns
-3db Bandwidth：-
Charge Injection：300pC
Channel Capacitance (CS(off), CD(off))：34pF, 34pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-60dB @ 1MHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4664CPE+

MAX4664CPE+

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4664CPE+ is a quad SPST CMOS analog switch in a 16-pin Plastic DIP package, operating from 0°C to +70°C. It features four normally closed (NC) switches with a maximum on-resistance of 5Ω and a maximum on-resistance match of 0.5Ω. The device supports single-supply voltages from +4.5V to +36V or dual supplies from ±4.5V to ±20V. Key electrical parameters include a maximum turn-on time of 275ns, a maximum turn-off time of 175ns, and an off-leakage current of 5nA at +85°C. Logic inputs are TTL/CMOS compatible with thresholds of +0.8V and +2.4V.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Rail-to-Rail signal handling capability for full voltage range operation
Guaranteed low on-resistance flatness over the specified signal range
TTL/CMOS-compatible control inputs for direct logic interfacing

Analog Switches, Multiplexers, Demultiplexers Applications

Reed relay replacement in automated test equipment
Audio-signal routing in communication systems
PBX and PABX system switching

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the component marking against the official datasheet specifications to confirm authenticity. Ensure the plastic DIP-16 package matches the required footprint. Confirm that the temperature grade corresponds to the commercial range requirements for the specific application environment.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this part when a normally closed configuration is required for the analog switch channels. Compare the 5Ω on-resistance against load requirements to ensure acceptable voltage drop. Verify that the single-supply or dual-supply voltage ranges align with the available power rails in the target circuit design.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX466x family of quad analog switches manufactured by Analog Devices / Maxim Integrated. The MAX4664 variant specifically provides four normally closed switches, distinguishing it from the MAX4665 (normally open) and MAX4666 (mixed NC/NO) counterparts within the same series.