MAX4665EPE

$3.35

Description：IC SWITCH SPST-NO X 4 4OHM 16DIP
Series：-

SKU:0df747da7b67 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4665EPE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPST-NO X 4 4OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4665EPE

Description：IC SWITCH SPST-NO X 4 4OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SPST - NO
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：4Ohm
Channel-to-Channel Matching (ΔRon)：200mOhm
Voltage - Supply, Single (V+)：4.5V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：275ns, 175ns
-3db Bandwidth：-
Charge Injection：300pC
Channel Capacitance (CS(off), CD(off))：34pF, 34pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-60dB @ 1MHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4665EPE

MAX4665EPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4665EPE is a quad single-pole single-throw (SPST) CMOS analog switch featuring a maximum on-resistance of 5Ω. It operates from a single +4.5V to +36V supply or dual ±4.5V to ±20V supplies. The device handles Rail-to-Rail analog signals with an off-leakage current of 5nA maximum at +85°C. On-resistance is matched between channels to 0.5Ω maximum and remains flat over the specified signal range. It includes TTL/CMOS-compatible control inputs and guarantees greater than 2kV ESD protection per Method 3015.7.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Quad SPST configuration with low on-resistance
Rail-to-Rail signal handling capability
TTL/CMOS-compatible digital logic inputs

Analog Switches, Multiplexers, Demultiplexers Applications

Reed relay replacement
Automatic test equipment
Audio-signal routing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'EPE' confirms the -40°C to +85°C extended temperature range and 16-pin Plastic DIP package. Confirm RoHS compliance status for the exact revision, as older Maxim Integrated batches may vary. Ensure the source document matches the Analog Devices / Maxim Integrated datasheet for accurate pinout and electrical specifications.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a quad SPST switch with guaranteed on-resistance matching is required. It serves as a direct alternative to mechanical relays in applications demanding lower board space and higher reliability. Verify that the 5Ω on-resistance meets the system's voltage drop requirements under load conditions.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the MAX4664/MAX4665/MAX4666 family of 5Ω quad analog switches. The MAX4665 specifically provides four normally open switches, distinguishing it from the MAX4664 (normally closed) and MAX4666 (mixed break-before-make). All variants share identical electrical characteristics and packaging options.