MAX4667EPE

$2.50

Description：IC SWITCH SPST-NCX2 2.5OHM 16DIP
Series：-

SKU:00f9dd03b484 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4667EPE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPST-NCX2 2.5OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4667EPE

Description：IC SWITCH SPST-NCX2 2.5OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube
Switch Circuit：SPST - NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：2.5Ohm
Channel-to-Channel Matching (ΔRon)：50mOhm
Voltage - Supply, Single (V+)：4.5V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：275ns, 175ns
-3db Bandwidth：-
Charge Injection：450pC
Channel Capacitance (CS(off), CD(off))：65pF, 65pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-66dB @ 1MHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4667EPE

MAX4667EPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4667EPE is a dual SPST CMOS analog switch in a 16-PDIP package. It features a maximum on-resistance of 2.5Ω with guaranteed matching and flatness of 0.5Ω over the signal range. The device supports rail-to-rail analog signals, operating from +4.5V to +36V single supply or ±4.5V to ±20V dual supplies. It includes TTL/CMOS-compatible control inputs and offers >2kV ESD protection. The component handles continuous currents up to 100mA and operates within a temperature range of -40°C to +85°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Dual SPST configuration with low on-resistance for minimal signal distortion
Rail-to-Rail signal handling capability across wide voltage ranges
Guaranteed on-resistance matching and flatness for precision applications
TTL/CMOS-compatible logic inputs for direct interface with digital systems

Analog Switches, Multiplexers, Demultiplexers Applications

Reed relay replacement in automated test equipment
Audio-signal routing in communication systems
PBX and PABX switching systems
Avionics instrumentation

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'EPE' confirms the -40°C to +85°C industrial temperature rating and 16-pin Plastic DIP package. Confirm RoHS compliance status as datasheets may vary by revision. Ensure ordering documentation matches the manufacturer's current part numbering system to avoid discrepancies in lead times or specifications.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when dual-channel switching with low distortion is required. The MAX4667 specifically provides two normally closed switches. Compare against MAX4668 (normally open) or MAX4669 (break-before-make) if different contact states are needed. Ensure supply voltages remain within the specified limits to maintain the guaranteed 2.5Ω on-resistance performance.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX4667/MAX4668/MAX4669 family of 2.5Ω dual analog switches manufactured by Analog Devices Inc./Maxim Integrated. These devices are designed as solid-state alternatives to mechanical relays, offering higher reliability and smaller board space consumption while maintaining comparable electrical performance for signal routing tasks.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

MAX4668EPE (Normally Open variant)

Analog Switches, Multiplexers, Demultiplexers FAQ

What is the difference between MAX4667 and MAX4668?

The MAX4667 contains two Normally Closed (NC) switches, whereas the MAX4668 contains two Normally Open (NO) switches. Both share identical electrical characteristics regarding resistance and speed.