MAX4669CPE

$3.67

Description：IC SW SPST-NO/NCX2 2.5OHM 16DIP
Series：-

SKU:2cbf5ff90e9c Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4669CPE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SW SPST-NO/NCX2 2.5OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4669CPE

Description：IC SW SPST-NO/NCX2 2.5OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube
Switch Circuit：SPST - NO/NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：2.5Ohm
Channel-to-Channel Matching (ΔRon)：50mOhm
Voltage - Supply, Single (V+)：4.5V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：275ns, 175ns
-3db Bandwidth：-
Charge Injection：450pC
Channel Capacitance (CS(off), CD(off))：65pF, 65pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-66dB @ 1MHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4669CPE

MAX4669CPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4669CPE is a dual SPST CMOS analog switch in a 16-pin Plastic DIP package, rated for an operating temperature range of 0°C to +70°C. It features a maximum on-resistance of 2.5Ω with guaranteed matching and flatness of 0.5Ω over the signal range. The device supports single-supply operation from +4.5V to +36V or dual supplies from ±4.5V to ±20V. Key electrical parameters include a maximum off-leakage current of 5nA at +85°C, turn-on time up to 500ns, and turn-off time up to 300ns under single-supply conditions. It handles rail-to-rail analog signals and includes break-before-make switching logic.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Guaranteed break-before-make switching action
Rail-to-rail analog signal handling capability
TTL/CMOS-compatible digital control inputs

Analog Switches, Multiplexers, Demultiplexers Applications

Reed relay replacement
PBX and PABX systems
Test equipment
Audio-signal routing
Communication systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'C' indicates the commercial temperature grade (0°C to +70°C) rather than the industrial grade (-40°C to +85°C). Confirm the 'PE' designation corresponds to the 16-lead Plastic DIP package. Ensure the component meets RoHS standards if required by the application specifications.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this part when a mixed normally open and normally closed configuration is required within a dual-switch architecture. The low on-resistance and high isolation make it suitable for precision signal routing. Verify that the single-supply voltage range aligns with the system power rails and that the commercial temperature range satisfies environmental constraints.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX4667/MAX4668/MAX4669 family of dual analog switches. While sharing identical electrical performance characteristics, the MAX4669 is distinguished by its internal logic providing one normally open and one normally closed switch. This contrasts with the MAX4667 (dual NC) and MAX4668 (dual NO) variants.