MAX4713CSE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4713CSE is a quad, single-pole/single-throw (SPST) analog switch featuring fault protection and rail-to-rail signal handling. It integrates two normally open and two normally closed switches within a 16-pin Narrow SO package. The device operates from a single +2.7V to +11V supply or dual ±2.7V to ±5.5V supplies. Key electrical parameters include a maximum on-resistance of 25Ω at +25°C with dual supplies, an on-resistance match between channels of 1Ω, and turn-on/turn-off times under 125ns and 80ns respectively. Leakage currents are typically ±10nA.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Fault-protected analog inputs allow signals beyond supply rails without excessive current draw.
• Rail-to-Rail signal handling capability for full voltage range operation.
• Output clamping during fault conditions protects downstream circuitry.
• TTL- and CMOS-compatible logic inputs ensure broad interface compatibility.

Analog Switches, Multiplexers, Demultiplexers Applications

• Communication Systems
• Signal Routing
• Data-Acquisition
• Industrial and Process Control Systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'CSE' corresponds to the commercial temperature range and narrow SOIC package configuration required for your design. Confirm availability status as older Maxim Integrated products may have limited stock or obsolescence notices. Ensure the ordering documentation matches the exact part number to avoid pinout mismatches with similar models.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the MAX4713CSE when a mixed configuration of normally open and normally closed switches is required in a single package. Compare on-resistance flatness requirements against the specified limits for your signal range. Verify that the fault protection thresholds align with your system's maximum expected transient voltages relative to the chosen supply rails.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX471x family of low-voltage analog switches. It shares pinouts with industry-standard non-fault-protected switches like the MAX393, facilitating direct replacements in existing designs. The 'C' suffix denotes the commercial temperature range, while 'E' variants cover extended industrial temperatures.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

Direct pin-compatible replacements include the MAX393 for standard switching without fault protection. For upgraded fault-protected alternatives, verify if the MAX4711 (all NC) or MAX4712 (all NO) configurations meet the circuit topology needs, noting the change in switch states.