MAX4713CUE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4713CUE is a quad, single-pole/single-throw (SPST) analog switch featuring fault protection and rail-to-rail signal handling. It integrates two normally open and two normally closed switches within a 16-pin TSSOP package. The device operates from a single +2.7V to +11V supply or dual ±2.7V to ±5.5V supplies. Key electrical parameters include a maximum on-resistance of 25Ω at +25°C with dual supplies, an on-resistance match between channels of 1Ω maximum, and a charge injection of 25pC typical. Switching times are less than 125ns for turn-on and 80ns for turn-off under standard test conditions.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Fault-protected analog inputs allow signals beyond supply rails without excessive current draw
• Rail-to-rail signal handling capability across the full supply range
• Output clamping to appropriate supply voltages during fault conditions protects downstream circuitry
• TTL- and CMOS-compatible logic inputs ensure broad digital interface compatibility

Analog Switches, Multiplexers, Demultiplexers Applications

• Communication Systems
• Signal Routing
• Data-Acquisition
• Industrial and Process Control Systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'C' indicates the commercial temperature range of 0°C to +70°C. Confirm the 'UE' suffix corresponds to the 16-pin TSSOP package. Check for end-of-life status as this component series may be discontinued by Analog Devices/Maxim Integrated. Ensure sourcing from authorized distributors to avoid counterfeit parts.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the MAX4713 variant specifically when a mix of normally open and normally closed switches is required within a single package. Compare against MAX4711 (all NC) and MAX4712 (all NO) if mixed configurations are not needed. Verify that the ±12V fault protection rating meets the system's transient voltage requirements. Ensure the low on-resistance matches the signal integrity needs of the application.

Analog Switches, Multiplexers, Demultiplexers Part Context

The MAX4713 belongs to the MAX471x family of fault-protected, low-voltage analog switches produced by Maxim Integrated, now part of Analog Devices. This family shares pinouts with industry-standard MAX391/MAX392/MAX393 devices, facilitating direct replacements in existing designs. The C-grade version denotes commercial operating temperatures, while the E-grade covers extended industrial ranges.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

The MAX4713CSE (16 Narrow SOIC) and MAX4713CPE (16 Plastic DIP) are pin-compatible alternatives offering different package footprints. For extended temperature applications, the MAX4713EUE (-40°C to +85°C) serves as a direct functional substitute with identical electrical characteristics.