MAX4713ESE+

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4713ESE+ is a quad, single-pole/single-throw (SPST) analog switch featuring fault protection and rail-to-rail signal handling. It integrates two normally open and two normally closed switches within a 16-pin Narrow SO package. The device operates from a single +2.7V to +11V supply or dual ±2.7V to ±5.5V supplies. Key electrical parameters include a maximum on-resistance of 25Ω at +25°C with dual supplies, a turn-on time of 125ns, and a turn-off time of 80ns. It supports TTL and CMOS logic inputs and maintains an operating temperature range of -40°C to +85°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Fault-protected analog inputs allow signals beyond supply rails without excessive current draw
• Rail-to-rail signal handling capability for full voltage range operation
• Pin-compatible with industry-standard MAX391/MAX392/MAX393 devices

Analog Switches, Multiplexers, Demultiplexers Applications

• Communication Systems
• Signal Routing
• Test Equipment
• Data-Acquisition
• Industrial and Process Control Systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'E' indicates the extended industrial temperature range of -40°C to +85°C. Confirm the 'SE' designation corresponds to the 16-pin Narrow SOIC package. Ensure the '+' suffix confirms compliance with RoHS standards. Cross-reference the manufacturer's latest documentation to confirm current production status and availability constraints.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when fault protection is required on both normally open and normally closed terminals. Verify that the mixed configuration of two NO and two NC switches aligns with the circuit topology. Ensure the supply voltage range accommodates the required signal swing while maintaining low on-resistance characteristics.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the MAX4711/MAX4712/MAX4713 family of fault-protected, low-voltage analog switches. While the MAX4711 contains four normally closed switches and the MAX4712 contains four normally open switches, the MAX4713 specifically combines two of each type in a single package.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

The datasheet explicitly states pin compatibility with the MAX391, MAX392, and MAX393 series. These devices share identical pinouts, allowing for potential direct replacements in existing printed circuit board designs where fault protection features are not critical.

Analog Switches, Multiplexers, Demultiplexers FAQ

Are the COM_ pins fault-protected?

No, the COM_ pins are not fault-protected. They act as normal CMOS switch terminals, and exceeding the supply voltages on these pins may cause high currents through internal ESD diodes.

What is the break-before-make time delay for the MAX4713?

The break-before-make time delay is specified with a typical value of 5ns under dual supply conditions and up to 50ns under single supply conditions.

How does the device behave during a power-off fault condition?

When power is removed, the fault protection remains active. The NO_ or NC_ terminals become a virtual open circuit, capable of withstanding faults up to ±12V.